JD VIP Buyers Club
JD on Facebook
JamestownTV
Request A Free Catalog

Interlux Varnish Specification Recommendations


Stage Product Previously Varnished Bare Wood Oily Wood
(Teak, Iroko)
Overcoat Time
Previously Varnished Bare Wood
Sand   220-220 grit

80-180 grit

220-220 grit 80-180 grit  
Pre-
Treatment

 

Perfection, Schooner®
Goldspar Clear, Goldspar Satin
Original
N/A 1 Coat, thinned 15-20% N/A 1 Coat, thinned 15-20% 12 Hours
Jet Speed  N/A 2-3 Coats N/A 2-3 Coats 4 Hours

Varnish Choice

Follow one complete varnish scheme

Schooner® 3-4 Coats 4-6 Coats 3-4 Coats 4-6 Coats 12 Hours
Goldspar Clear 3-4 Coats 4-6 Coats 3-4 Coats 4-6 Coats 12 Hours
Goldspar Satin 3-4 Coats 4-6 Coats 3-4 Coats 4-6 Coats 12 Hours
Original 3-4 Coats 4-6 Coats 3-4 Coats 4-6 Coats 12 Hours
Perfection 2-3 Coats† 3-5 Coats 2-3 Coats † 4-6 Coats 12 Hours




Minimum wait time between coats or between overcoating with the next step in the system, at a temperature of 73 Deg F (23 Deg. C). Please consult product data sheets (available at yachtpaint.com) for overcoating times at different temperatures.

*Always avoid applying a two-part product onto a surface previously varnished with a one-part varnish.

Note: Inter-Prime Wood Sealer 1026 can be used instead of a thinned coat of varnish

Original article from Interlux

JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog