JD VIP Buyers Club
JD on Facebook
JamestownTV
Request A Free Catalog

One-shot pot repair with West System


By Tom Pawlak

My wife Mary and I recently went to the local building center to purchase a large planter pot for our patio. After we had agreed on a nice large terra-cotta beauty, I noticed another large pot that had a nasty crack. I asked the associate for a price on it, knowing it would be easy to repair with WEST SYSTEM® epoxy. He said I would be doing him a favor if I took it away. So we came home with two pots for the price of one.

The pot was made of tough polyurethane foam that looked like red terra-cotta. It must have taken a nasty hit because it had cracked from the lip of the pot to the bottom (Figure 1). From the photos, you can see the extent of the damage and the techniques used for the repair. The WEST SYSTEM 105/205 repair was done with one pump resin and one pump hardener from the 300 Mini Pumps. The epoxy was thickened slightly with 406 Colloidal Silica. Clear stretch wrap was used to pull the parts together (Figure 2), and I must say, worked great for the job. Each wrap applied additional force, which helped draw the pieces together nicely. The clear plastic wrap allowed me to see the joint as it came together (Figure 3) and even molded the epoxy as it squeezed out of the crack as the parts were drawn together.

Epoxyworks 24 / Winter 2006

Copyright 2002, Gougeon Brothers, Inc. All rights reserved.
Reproduction in any form, in whole or in part, is expressly forbidden without the consent of the publisher. EPOXYWORKS, Gougeon Brothers, WEST SYSTEM, Episize, Scarffer and Microlight as used throughout this publication, are trademarks of Gougeon Brothers, Inc., Bay City, Michigan, USA.


west system brand logo

JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog