JD VIP Buyers Club
JD on Facebook
JamestownTV
Request A Free Catalog

Interlux One-Part Topside Paint Preparation Scheme


One-Part Paint Systems- Brightside, Yacht Enamels


This preparation scheme provides a good level of protection.

STAGE

PRODUCT

 FIBER
GLASS 

 ALUM 

 WOOD

STEEL

OVER COAT TIME *

CLEAN

Fiberglass Solvent Wash 202 or Special Thinner 216 202 216 216 216 20 minutes

SAND

  180-220 grit sandpaper sand blast or disc grind (coarse emery cloth) 180-220 grit sandpaper sand blast or disc grind (coarse emery cloth)  

CLEAN

Fiberglass Solvent Wash 202 or Special Thinner 216 202 remove residue (with broom or airline) 216 remove residue (with broom or airline)  

SURFACE PRIMER

Awlgrip Wash Primer CF n/a 1 thinned n/a 1 thinned 1 hour

PRE PRIMER

Yacht Primer n/a n/a 1 coat (thinned 10-15%) n/a 8 hours

PRIMER

Yacht Primer n/a 1 coat - 1 coat  

FILLER

(if needed)
Surfacing Putty 257 YES YES YES YES 4 hours

PRIMER

Yacht Primer n/a 1-2 coats 1-2 coats 1-2 coats  

PRIMER/ UNDER COATER

Pre-Kote 1-2 coats 1-2 coats 1-2 coats 1-2 coats 8 hours

TOPCOAT

Brightside 2 coats 2 coats 2 coats 2 coats 12 hours


* Minimum wait time between coats or between overcoating with the next step in the system, at a temperature of 73°F (23°C). Please consult product data sheets for overcoating times at different temperatures.





BOAT PAINTING GUIDE
Topsides        Decks        Bilges        Cabins

Topside Paint FAQ
Refinishing NonSkid
Three Options to Painting Non-Skid
Topside Paint Selector
Two-Part Perfection Preparation Scheme
One-Part Paint Preparation Scheme
Preparation and Priming for Topside Paint
Applying Gloss Finish
Fill Holes, Voids and Nicks
Painting with Two-Part Perfection
Tips on Applying Perfection
Painting Bilges
Do's and Don'ts for Paint Finishes
 



JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog