3M Marine Adhesive and Sealant Chart

3M Marine offers a complete line of adhesives and sealants that are designed to perform in the harsh marine environment, including the legendary 3M™ Marine Adhesive/Sealant 5200.

Cosmetic and General Bonding & Sealing

Applications:

• Deck Fittings
• Thru Hull
• Hatches
• Trim
• Electrical Assemblies
• Port Lights
• Toe Rails

3M™ Marine Adhesive/Sealant 4000 UV

3M™ Marine Adhesive/Sealant 4000 UV has superior UV resistance properties that make this an ideal cosmetic sealant. It is a one-part sealant that cures to form a firm, rubbery waterproof seal. Its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking.

• Exceptional sealing/bonding properties
• Above or below the waterline use
• Fast curing
• Allows for disassembly

3M™ Marine Adhesive/Sealant 4000 UV

3M™ Marine Adhesive/Sealant Fast Cure 4200 is a general purpose adhesive/sealant that allows parts to be disassembled without damaging wood or fiberglass. It is a one part polyurethane that cures with moisture for flexible bonds.

• Exceptional sealing/bonding properties
• Above or below the waterline use
• Fast Curing

General Bonding & Sealing - Above Waterline

Applications:

• Above the waterline sealing for:
• Fiberglass
• Deck Hardware
• Hatches

3M™ Marine Grade Silicone Sealant

3M™ Marine Grade Silicone Sealant is a one-part sealant that cures to form a firm, rubbery waterproof seal. Excellent resistance to marine environment. Designed for marine applications above the waterline.

• Allows for disassembly
• Fast Curing
• Easy Clean-Up
• Non-Sagging

Permanent Bonding & Sealing

Applications:

• Hull to Deck
• Struts
• Toe Rails
• Stern Joints
• Deck Fittings
• Trunk Joints
• Thru Hulls

Key Attributes:

• Exceptional sealing/bonding properties
• Above or below the waterline use

3M™ Marine Adhesive Sealant 5200

3M™ Marine Adhesive Sealant 5200 is a one-part sealant that cures to form a firm, rubbery waterproof seal. 5200 has a long work time for large projects. Its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking.

• Color: White, Black, Tan and Mahogany

3M™ Marine Adhesive Sealant Fast Cure 5200

3M™ Marine Adhesive Sealant Fast Cure 5200 is a one-part sealant that cures to form a firm, rubbery waterproof seal. Fast Cure 5200 has a short work and cure time which allows boats to get back in service quicker. Its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking.

• Color: White

Coverage Charts for Adhesive Sealant Products

Given the desired diameter of a bead or the dimensions of a seam, the coverage obtained from a cartridge can be looked up in the following charts. Note that the values are calculated for "no waste." The actual coverage will be based on application technique and overfill.

Bead Diameter (inch)		Length of Bead (lineal feet)
fractional	decimal	for 10 fl. oz.	for 3 fl. oz.
⅛	0.125	126.2	37.8
¼	0.250	31.6	9.4
⅜	0.375	14.0	4.2
½	0.500	7.9	2.3

Area Coverage

Should it be necessary to cover an area with the adhesive sealant, the material should be dispensed from the container and spread with a trowel. Most trowels for spreading adhesives will have a notched edge to facilitate control of the thickness being applied. When the notch depth is known or can be measured, the coverage area can be determined from the following tables. Should it be necessary to apply a solid layer of a specific thickness, take the value given in the following table and divide the area by two.

For Additional Information: To request additional product information or to arrange for sales assistance, please call 1-877-366-2746 (1-877-3M MARINE).
Address correspondence to: 3M Marine, 3M Center Bldg. 223-6S-06, St. Paul, MN 55144-1000. To send a fax, please call 651-737-9658.

Warranty and Limited Remedy: 3M warrants this product will be free from defects in materials and manufacture for 12 months from the purchase date. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If the product is proved to be defective within the warranty period, your exclusive remedy and 3M's and seller's sole obligation will be, at 3M's option, to replace the product or refund the purchase price.

Limitation of Liability: 3M and seller will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, of contract, negligence or strict liability.

The foregoing Warranty and Limited Remedy and Limitation of Liability language may be changed only by a written agreement signed by authorized officers of 3M and seller.