JD VIP Buyers Club
JD on Facebook
JamestownTV
Request A Free Catalog

Teleflex MT-3 Mechanical Control




Technical Reference Manual





NOTE: When properly installed, these engine controls will connect to outboard, stern drive and inboard engines, utilizing universal 3300/33C and 4300/43 type cables and engine connection kits. (These controls are not designed to use Mercury/ Mariner and OMC OEM type control cables that have "eye" terminals at the control end of the cable.)

4300/43 type cables cannot to be used on MT-3 Twin, as interference will occur.

(May require purchase of cable connection kit(s) to complete control system installation.)



(dual-function control- each lever controls throttle AND shift)


Ideal for inboards, stern drives and outboards, MT-3 combines classic binnacle control styling with dual function levers, a neutral safety switch and an engine warmup feature! Control throttle and shift with one lever instead of two. MT-3 Twin can control two engines.



Applications:


Great for single station inboards stern drives and outboards, single or dual engine. Perfect for applications in which a binnacle control appearance is desired, but one-lever throttle/ shift control is preferred. Also a great choice when space is at a premium.

This control uses 3300/33C type cables (single and dual lever) and 4300/43 type cables (single lever version only).

Not suitable for use with Mercury and OMC OEM type control cables.



Features:


  • Binnacle styling with the advanced features of a dual-function control: one-handle engine control, neutral warm-up.
  • Neutral safety switch to help prevent starting in gear.
  • Mechanical advantage - shift 2.77:1/throttle 3.57:1.
  • Meets/exceeds all applicable industry standards.

Engine throttle warm-up is done by pulling out the hand levers in the neutral position. This disengages the clutch and allows throttle to be advanced in neutral. Returning to neutral detent re-engages clutch.



Engine Control:

SINGLE LEVER:

MT-3 Single ............................................ 308601

TWIN LEVER:

MT-3 Twin ............................................... 308602



Options/Service Items:


  • Optional Neutral Safety Switch............... 305499
  • Hand Lever......................................032778-002
  • Chrome Side Plate, MT-3 ................308598-001
  • Ball Knob, Red...................................... 4009912
  • Stainless Steel Knob (red-grooved)...CA69052P
  • Decal, FWD-NEU-REV........................... 038853
  • Hardware Kit for MT-3 single lever ......... 308599
  • Hardware Kit for MT-3 twin lever ............ 308727
  • OMC Replacement Switch for Sterndrive (available for MT-2 only) ......................... 301585
  • 43 Cable Heavy Duty Connection Kit ..... 308742
  • (Must be used when connecting a 4300/43CC or 4300/43BC cable to the control. 43 series cables can only be used with the single-lever model.)
  • Connection Kits .. (see Connection Kits section)



NOTE: 4300/43 type cables cannot to be used on MT-3 Twin, as interference will occur.



JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog