Fine finish specialists
The ETS 150/3 is a favorite for fine sanding and extra-fine sanding, producing an excellent surface finish with a short 1/8" (3.0 mm) stroke. The ETS 150/5, with a 3/16" (5.0 mm) stroke, is perfect for light sanding or intermediate sanding. Both feature a rubberized top grip, ergonomic handle, finger tip switch and vibration-stop balancing to reduce the discomfort normally associated with sanding. Jetstream dust extraction improves the surface finish by removing dust particles as they are generated, while at the same time, prolonging pad and abrasive life. With soft-start, step-less speed controls, and constant speed under load, these sanders perform on a level that you are not likely to have experienced.
Formed to fit your hand for one or two hand operation, with rubberized top grip.
Electronic controls deliver soft-start, step-less variable speed control, constant speed under load, and thermal and overload protection.
Allows for uninterrupted running for optimum control.
Plug-It Power Cord
Interchangeable cord design allows you to quickly switch between tools.
Jetstream design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life.
1/8" Sanding Stroke
The ETS 150/3 sander is distinguished by its stroke length which is design for superfine sanding.
Balanced design delivers better finish results, smooth operation and greater comfort.
Stops the pad quickly, so you can worry less about damaging your freshly finished workpiece when setting your tool down.
StickFix Hook & Loop Design
Fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, leading to longer abrasive and pad life.