JD VIP Buyers Club
JD on Facebook
JamestownTV
JD Points Program
Request A Free Catalog

Epifanes Nonskid Deckcoating Application Directions


Epifanes Nonskid Deckcoating




Superior hardness, and ease of application!

Type One-component semi-gloss urethane-alkyd resin based deckpaint containing polypropylene beads as a nonkid agent.
Color White, Cream #1, Gray # 212 (see color chart).
Gloss Eggshell
Recommended use Nonskid finishing coat for wood, steel, aluminum and fiberglass in conjunction with the appropriate primers. For exterior and interior use above the waterline.
Properties Excellent color retention, cleans easily and stands up to rough wear. Polypropylene beads are considered superior as a non-skid agent because the beads absorb a portion of the finish maintaining color retention and structural integrity. Provides even coverage when rolled.
Container Size 750 ml.
Density 1.10 -1.30 kg./liter
Solids Content 60 +/- 2 vol. %
Recommended film thickness Per coat wet - 100 micron
Per coat dry - 60 micron
Application Best by roller, or brush.
Thinner Epifanes Brushthinner for Paint and Varnish
Drying times at 65F / 65% RH Tack free - 1 hour      Tape free - 24 hours
Hard Dry - 24 hours       Recoatable - 24 hours
Note: Allow 72 hours before walking on last coat.
Application notes See instructions "Finishing Yacht Enamel". Replace topcoats with Nonskid. Coverage approx. 80 sq. ft. per liter.
Application conditions Temperature should be between 50F. and 85F. during application. Air humidity below 85%. Avoid painting in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability. Add thinner up to the specified percentage to compensate for the faster release of solvents. Epifanes Nonskid Deckcoating can be used over most types of one-component alkyd or urethane-based paint systems and over properly sanded two-component paint systems.

JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog