TotalBoat Juggernaut Bottom Paint
Interlux Fiberglass Bottomkote ACT, antifouling paint, marine paint
Interlux Interlux Bottomkote ACT contains Irgarol
  • Interlux Fiberglass Bottomkote ACT, antifouling paint, marine paint

Interlux ACT with Slime Fighter

Interlux ACT bottom paint provides premium seasonal antifouling protection in moderate to heavy fouling areas from algae, slime, barnacles, and zebra mussels. It is compatible with (and can be applied over) other antifouling paint as long as that coating is in acceptable condition. 'ACT' stands for Interlux's Ablative Copolymer Technology, which constantly exposes fresh biocide for anti-fouling protection throughout the season. ACT eliminates the problem of old coating buildup and associated need for heavy sanding to remove. ACT is very effective at controlling shell fouling such as barnacles and zebra mussels and contains a Slime Fighter to control weed, slime and algae growth, keeping the bottom cleaner longer.
Gray White  
1 gl and more
IN STOCK - Available for pickup  
$127.99 / gl
qty.   
$127.99
$49.99
$49.99
$127.99
$49.99
$49.99
$127.99
$49.99
$49.99
$127.99
$49.99
$49.99
$127.99
$127.99
$127.99
$344.99
$344.99
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Interlux Fiberglass Bottomkote ACT with Slime Fighter specifications

  • Finish: Matte
  • Specific Gravity: 2.1
  • Volume Solids: 57%
  • Typical Shelf Life: 2 yrs
  • VOC (As Supplied): 370 g/lt
  • Unit Size: 1 US QUART, 1 US GALLON
  • Number of Coats:2-3 minimun, Bare Wood- 3 coats (first thinned)
  • Coverage:(Theoretical) - 455 (sq. ft./Gal)
  • Touch Dry Time: 50 F - 3 Hrs, 73 F - 2 Hrs, 95 F - 1 Hrs
  • Immersion Dry Time: 50 F - 16 Hrs, 73 F - 16 Hrs, 95 F - 16 Hrs

 

Drying Information  50 Degrees F  59 Degrees F  73 Degrees F  95 Degrees F 
Touch Dry (ISO)  3 hours  2 hours  1 hour  30 min 
Overcoating Info  Min-Max  Min-Max  Min-Max  Min-Max 
Time  16 hours  14 hours  12 hours   8 hours 
APPLICATION AND USE

Preparation

BARE FIBERGLASS - (POLYESTER OR VINYLESTER): Scrub the surface thoroughly with using a stiff brush and Interlux All Purpose Boat Soap. Rinse with fresh or salt water to remove loose dirt. Flush with fresh water to remove the soap residue and allow to dry. Remove mold release wax using one of the following methods. Apply Fiberglass Surface Prep YMA601 with a maroon, 3M Scotch-BriteTM pad and scrub well. Flush with fresh water or wipe off with a clean, wet cloth ensuring that no traces of Fiberglass Surface Prep remain. An alternative method would be to dampen a cheesecloth with Interlux Fiberglass Solvent Wash 202. Wipe thoroughly to remove all surface contamination and cleaners. Wipe off with a clean, dry rag before liquid dries. To be certain the contamination has been removed, run water over the surface. If the water beads up or separates, repeat one of the above methods. When the water sheets off, all contamination has be removed. Sanding does not remove contamination. After the surface has been properly prepared follow the application system below.

Bare Fiberglass - No Sanding System: Clean surface as above. Apply one thin, continuous coat of Interlux Fiberglass No-Sand Primer with brush or roller (do not spray; do not sand). Follow application guidelines for the primer and apply Fiberglass Bottomkote ACT with Irgarol.

Bare Fiberglass -Sanding System: Clean the surface following the preparation procedure above. Sand with 80 grade (grit) paper and remove sanding residue with Fiberglass Solvent Wash 202. Repair defects with Watertite, then sand and wipe clean. Apply Fiberglass Bottomkote ACT with Irgarol.

BARE WOOD: Sand with 80 grade (grit) sandpaper and remove sanding residue with Special Thinner 216. Repair defects with Watertite, then sand and wipe clean. Apply first coat reduced 10% with Special Thinner 216 or Brush-Ease 433. Fill seams, if necessary, with Seam Compound Brown 30. Apply 2 further coats of Fiberglass Bottomkote ACT with Irgarol.

PREVIOUSLY PAINTED SURFACES: In Good Condition: Wet sand surface with 80 grade (grit) paper to a clean firmly attached surface. Clean with Special Thinner 216. In Poor Condition: Use Interstrip to remove all traces of antifouling. Sand and wipe clean with Fibreglass Solvent Wash 202 for fiberglass and wood substrates. For steel, sandblast or grind to bright metal finish.

STEEL: Contact the Interlux Technical Service Department at 1-800-468-7589 for full information on how to properly prime underwater metals.

Method Apply a minimum of 2 coats (3 on bare wood) by brush, short-nap roller or spray. To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide.

Hints

Mixing Stir or shake contents thoroughly before use.

Thinner Special Thinner 216 or Brush-Ease 433.

Thinning Thin only if necessary. Thin no more than 10%. Use Brush-Ease 433 if roller or brush drags during application.

Cleaner Painted Surfaces - Special Thinner 216. Bare Fiberglass - Fiberglass Solvent Wash 202 or Fiberglass Surface Prep YMA601. Bare Wood - Special Thinner 216.

Airless Spray Tip Size: 0.53-0.66 mm/21-26 thou. Pressure: 170-204 bar/2500-3000 psi.

Conventional Spray Pressure Pot: Tip Size: 1.8-2.2 mm/70-85 thou. Pressure: 4.08-4.76 bar/60-70 psi (gun pressure); 10-15 psi (pot pressure).

Roller Use a 3/8" nap solvent resistant roller.

Other Take care to apply all the paint calculated even if it means applying an extra coat. Do not apply thin coats. Fill seams if necessary in between 1st and 2nd coats of antifouling with Underwater Seam Compound 30. Spraying of antifouling paints is prohibited in Canada.

Some Important Points Not suitable for use over aluminium/alloy substrates. Colors may fade or change above the waterline. Stir well before use. Product temperature should be minimum 10C/50F and maximum 29C/85F. Ambient temperature should be minimum 10C/50F and maximum 29C/85F. Substrate temperature should be minimum 10C/50F and maximum 29C/85F.

Compatibility/Substrates Not suitable for use over Aluminium/Alloy substrates. Suitable for fiberglass, wood and painted surfaces. Do not apply over tin-based copolymer antifouling paints. Do not use under vinyl based antifouling paints such as VC Offshore, Baltoplate or TBT based antifoulings such as Micron 33.

Number of Coats 2 coats, 3 on bare wood

Coverage (Theoretical) - 455 (sq. ft/Gal)

Recommended DFT 2.0 mils dry

Recommended WFT 3.5 mils wet

Application Methods Brush, Conventional Spray, Roller, Airless Spray

TRANSPORTATION,STORAGE AND SAFETY INFORMATION

GENERAL INFORMATION: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Fiberglass Bottomkote® ACT with Irgarol® to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight.

TRANSPORTATION: Fiberglass Bottomkote® ACT with Irgarol® should be kept in securely closed containers during transport and storage.

GENERAL: Antifoulings should only be wet sanded. Never dry sand or burn-off old antifoulings. Read the label safety section for Health and Safety Information, also available from our Technical Help Line.

DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal. Remainders of Fiberglass Bottomkote® ACT with Irgarol® cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.

BRAND: Interlux
Number Of Parts: One Part
Type: Copper AF Paint
4.2 12

REVIEW SNAPSHOT®

by PowerReviews
Interlux Fiberglass Bottomkote ACT with Irgarol
 
4.2

(based on 12 reviews)

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (5)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

90%

of respondents would recommend this to a friend.

Pros

  • Even paint distribution (6)

Cons

    Best Uses

    • Large areas (5)
      • Reviewer Profile:
      • Avid do-it-yourselfer (8)

    Most Liked Positive Review

     

    Easy and looks great

    This bottom paint was easy to roll on my sailboat bottom and also easy to brush in between my rudder and the hull. The color looks great and there are no overlaps. A great...Read complete review

    This bottom paint was easy to roll on my sailboat bottom and also easy to brush in between my rudder and the hull. The color looks great and there are no overlaps. A great replacement for Bottomkote Classic.

    VS

    Most Liked Negative Review

     

    paint

    paint good price right...needs better shipping RE can was banged up causing leakage..

    paint good price right...needs better shipping RE can was banged up causing leakage..

    Reviewed by 12 customers

    Sort by

    Displaying reviews 1-10

    Back to top

    Previous | Next »

     
    3.0

    paint

    By Bill

    from smithville NJ

    About Me Avid Do-It-Yourselfer

    Verified Buyer
    Ensign

    Pros

      Cons

      • Causing Slow Leak
      • Gallon Can Was Banged Up

      Best Uses

        Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

        paint good price right...needs better shipping RE can was banged up causing leakage..

         
        5.0

        Good price on a good paint.

        By Jim Jam

        from Kinsale, VA

        About Me Avid Do-It-Yourselfer

        Pros

          Cons

            Best Uses

              Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

              I would buy from you again - JD is good to work with.

               
              5.0

              GREAT SERVICE,AND PRICE,EASY TO USE WEB

              By T D

              from RICHMOND, VIRGINA

              About Me Avid Do-It-Yourselfer

              Pros

                Cons

                  Best Uses

                    Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                    FIRST TIME USING THIS PRODUCT.

                     
                    4.0

                    Good value multi-season paint

                    By Mike

                    from CT

                    About Me Avid Do-It-Yourselfer

                    Verified Reviewer

                    Pros

                    • Even Paint Distribution

                    Cons

                      Best Uses

                        Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                        I used ACT on a 22' boat and got 4 years of life with 3 coats. Antifouling properties are good, had minimal cleaning at the end of the season. Just purchased more and I hope it does as well as the previous paint job. Jamestown had the best price and super fast delivery!

                        (1 of 2 customers found this review helpful)

                         
                        4.0

                        bait and switch

                        By ZigZag

                        from Harstine Island, WA

                        About Me Casual Do-It-Yourselfer

                        Verified Reviewer

                        Pros

                        • Easy To Clean

                        Cons

                          Best Uses

                            Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                            This is the product they advertise - but what you get is the new interlux product that is replacing Fiberglass Bottomkote ACT which is what I ordered. The 'new' product has about 1/2 of the copper as the old and 30% more 'inert' ingredients. I have yet to apply it to my Newport 30 but will write a review when I use it.

                            (0 of 2 customers found this review helpful)

                             
                            2.0

                            for the money...

                            By jonesy

                            from south jersey

                            About Me Avid Do-It-Yourselfer

                            Pros

                            • Ergonomic Grip

                            Cons

                              Best Uses

                                Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                                for the money I switched to Hydrocoat by pettit, so much easier to use and environmentally friendly. they have a 10.00 rebate again this year

                                (0 of 2 customers found this review helpful)

                                 
                                5.0

                                Easy and looks great

                                By Luc B

                                from Chicago area

                                About Me Beginner

                                Verified Reviewer

                                Pros

                                • Easy to work with
                                • Even Paint Distribution
                                • Great Color
                                • No Splatter

                                Cons

                                  Best Uses

                                  • Large Areas
                                  • Small Areas

                                  Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                                  This bottom paint was easy to roll on my sailboat bottom and also easy to brush in between my rudder and the hull. The color looks great and there are no overlaps. A great replacement for Bottomkote Classic.

                                  (0 of 1 customers found this review helpful)

                                   
                                  5.0

                                  Good product, will buy again.

                                  By Bovanwinkle

                                  from Harrodsburg,Ky

                                  About Me Avid Do-It-Yourselfer

                                  Verified Reviewer

                                  Pros

                                  • Easy To Clean
                                  • Even Paint Distribution

                                  Cons

                                    Best Uses

                                    • Large Areas

                                    Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                                    Drys very fast in warm weather so work fast or recruit some help. 3/8" nap roller worked for me and cleans up with mineral spirits.

                                     
                                    5.0

                                    Excellent product as always!!!

                                    By Big AL

                                    from Gibraltar, MI

                                    About Me Avid Do-It-Yourselfer

                                    Pros

                                    • Even Paint Distribution

                                    Cons

                                      Best Uses

                                      • Large Areas

                                      Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                                      Make sure you mix well before and during painting.

                                      (1 of 2 customers found this review helpful)

                                       
                                      4.0

                                      Interlux ACT

                                      By Boater

                                      from Victoria BC

                                      About Me Avid Do-It-Yourselfer

                                      Pros

                                      • Easy to apply
                                      • Even Paint Distribution
                                      • Lightweight

                                      Cons

                                        Best Uses

                                        • Large Areas

                                        Comments about Interlux Fiberglass Bottomkote ACT with Irgarol:

                                        Quick and easy to apply and dries very evenly, can recoat in a couple of hours.

                                        Displaying reviews 1-10

                                        Back to top

                                        Previous | Next »

                                        Users Also Bought:
                                        JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog