Buy the 3M Production Paper Sheets 2-3/4 inches wide x 17-1/2 inches long on http://www.jamestowndistributors.com/
Print This Page
Print This Page
Brand:
3M
Located in:
Abrasives, Rolls and Longboard Abrasives
3M Long Board Production brown aluminum oxide sandpaper sheets are intended for dry sanding only, by machine or hand on fiberglass, wood, or metal. They can also be used for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. For non-critical, short-term application. Production sheets are open coat with aluminum oxide mineral. 2-3/4" x 17-1/2" sheets are sold in quantities of 10.
Avoid This Paper
By NH505
from NH on 2/21/2011
from NH on 2/21/2011
Cons:
Ineffective, Not Durable
Describe Yourself:
Advanced
Was this a gift?:
No
Bottom Line:
No, I would not recommend this to a friend
Comments about 3M 3M Production Paper Sheets 2-3/4 inches wide x 17-1/2 inches long:
This is an inferior paper to others. It loads up fast and does not have the cutting power one would expect of an 80 Grit. Go with a more premium sand paper for long boarding.
80 grit works well on rough fairing!
By Raven Art from Riverside, RI on 12/25/2010
from Riverside, RI on 12/25/2010
Pros:
Easy to Use
Cons:
Somewhat short
Describe Yourself:
Advanced
Was this a gift?:
No
Bottom Line:
Yes, I would recommend this to a friend
Comments about 3M 3M Production Paper Sheets 2-3/4 inches wide x 17-1/2 inches long:
This 80 grit works great on rough fairing West System epoxy w/#407. The only problem is it doesn't fit well on my Hutchins flexible long board(it's too short to install easily) It works fine on my Norton stiff long board.