Customers most agreed on the following attributes:
Comments about Jamestown Distributors Oil Sorbent Material:
I use these pads in the bilge of my '41 Chris Craft runabout. There is always a little oil and water present when the boat is run and these pads suck up the oil & hold it while rejecting water. The oil is contained & does not slosh around & soil the far reaches of the bilge. Really does the job,and absolutely rejects the water.
Comments about Jamestown Distributors Oil Sorbent Material:
I use this in the bilge of my '41 Chris Craft runabout. The few ounces of oil that appear in the bilge use to move around on top of the gallon or two of water in the bilge and get most of the bilge oil coated. These pads grab the oil and keep it from moving around and coating other parts of the bilge. They hold no water.
[1 of 3 customers found this review helpful]
Comments about Jamestown Distributors Oil Sorbent Material:
I developed a leak in my tank that allowed the diesel to get into my bilge. I had water in the bilge so I used the pads to soak up the diesel. It worked very well and did not seem to have any water in it.