Print This Page
Customers most agreed on the following attributes:
from Coastal North Carolina on 12/8/2010
Comments about WEST System WEST System 8002 Roller Cover:
We looked far and wide for roller covers that would work well for laminating fiberglass mat and cloth with epoxy. These roller covers are the first we've found that work well for this purpose. They don't come apart, and they hold only a very thin layer of epoxy, so they don't harden quickly, and can be used for a reasonable period of time-- at least two hours.
from New York on 8/9/2009
Comments about WEST System WEST System 8002 Roller Cover:
I used this product to apply West epoxy to wood boat. It works very well except when the roller delaminates, at which point you need to chuck it and use another one. Make sure to purchase extras.
Comments about WEST System WEST System 8002 Roller Cover:
Use these foam rollers for applying the last two coats of Epifanes High Gloss Clear Varnish. Worked very well!
from Homewood, Kansas on 6/11/2009
Comments about WEST System WEST System 8002 Roller Cover:
This product is all we use in our shop with the West System Epoxies.
[1 of 1 customers found this review helpful]
from Philadelphia, PA on 8/26/2008
Comments about WEST System WEST System 8002 Roller Cover:
I used this roller to apply Interlux Micron CSC bottom paint and it delaminated almost immediately. The foam came off the roller very quickly and the foam pieces then broke off leaving a real mess in the paint.