Buy the System Three SilverTip Laminating Resin Kits on http://www.jamestowndistributors.com/ Print This PagePrint This Page
System Three SilverTip Laminating Resin Kits image
 
(based on 2 ratings)
Brand: System Three
Located in: Epoxy and Adhesives, Epoxy Resin
SilverTip Laminating Resin is Designed specifically for laminating. It is a med-low viscosity, liquid epoxy system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. Fast wet-out, no blush, and cures to a brilliant, colorless finish. Working time is longer than most boat building epoxies, without sacrificing cure time. Cured film is tough and resilient with better heat resistance than other room temperature cured epoxies. Each SilverTip kit includes 1 gallon of laminating resin, 1/2 gallon of either fast or slow hardener and a set of calibrated plungers for dispensing.
Review Snapshot®
Avg. Customer Rating:
 
4.5 stars
(based on 2 reviews)
 
Clear finish, no yellow tint
By Cedar strip boat builderVerified Reviewer from Grand Junction, CO on 1/12/2010
Bottom Line:
Yes, I would recommend this to a friend

Comments about System Three System Three SilverTip Laminating Resin Kits:

I use decorative inlays of all shades of cedar and redwood on the decks of my cedar strip kayaks. The clear finish of Silver Tip resin allows the true color of the wood to come through. Definitely enhances the true beauty of the wood compared to other resins.

[1 of 1 customers found this review helpful]

 
This is my favorite epoxy.
By modulus 1319 from Green Bay, WI on 4/16/2008
Pros:
Excellent bonding, Good mix of properties, Protects Well, Visually Pleasing
Cons:
Odd mix ratio by weight
Best Uses:
General Lamination, Indoor
Describe Yourself:
Recreational
Bottom Line:
Yes, I would recommend this to a friend

Comments about System Three System Three SilverTip Laminating Resin Kits:

Unless you need maximum strength, or ultra-low viscosity, this is the one to use. No blush, good strength, no post-cure required, and it doesn't trap bubbles. It will bond to bare glass extremely well. I just don't like the fact that it has an odd mix ratio (if you do it by weight, 100 parts resin to 43 part hardener).

Powered by PowerReviews
Copyright © 2011 Jamestown Distributors All Rights Reserved. Do not republish contents.