Print This Page
Brand:
System Three
Located in:
Epoxy and Adhesives, Epoxy Resin
System Three Slow Hardener is a No-Blush hardener that works well in a temperature range of 65 to 90 degrees Fahrenheit. At 65 degrees, you will have a 10 hour green cure stage that will allow you to recoat without sanding or washing. The next coat will chemically bond to the uncured epoxy. When selecting a hardener consider the minimum temperature expected during application and cure time in relation to pot life. Combine System Three hardeners to create a continuous range of cure times within the parameters of the Fast, Medium and Slow.
[1 of 1 customers found this review helpful]
System Three has performed great.
By Wayne
from Sherman, Tx. on 8/5/2009
from Sherman, Tx. on 8/5/2009
Pros:
Easy to Use, Protects Well, Visually Pleasing, Weather Proof
Cons:
Messy
Best Uses:
Indoor, Outdoor
Describe Yourself:
Recreational
Bottom Line:
Yes, I would recommend this to a friend
Comments about System Three System Three Slow Hardener:
Measuring Part A and B by weight produces extremely good results.
If you use pumps to remove the product from the jugs, prepare for a small amount of dripping after each use. 100% isopropyl alcohol cleans up messes very well.