I've used this to build a 34-foot molded plywood schooner. At one point,
bending the 1x6 D. fir first lamination of the sheer clamp in to meet the sternpost required a come-along, and the angle was acute, with the bevel on the board endgrain. I thought "She'll never hold." Guess what: she held!
(I reinforced it anyway though.) Epoxy approaches magic, and this is a good one.
This stuff is very tuff, ( i couldn't scrap or even sand it with 80 grit very efectively), used as a sealer-adhesive does not roll out smooth it is too thick a gel, but it doesn't sag or run or fly off the roller even over head.