Buy the Interlux - Interfill 830 Fast Cure Epoxy Profiling Filler on http://www.jamestowndistributors.com/
Print This Page
Print This Page
Brand:
Interlux
Located in:
Epoxy and Adhesives, Fairing Compounds and Repair Putties
Interlux - Interfill 830 Fast Cure Epoxy Profiling Filler A two-part epoxy filler that can be used above the waterline to the surface prior to applying topside finishes, and can be used to fill pinholes between coats of two-part polyurethanes, due to its ability to trowel to a very line, smooth finish. Interfill Epoxy Filler can also be used below the waterline to fill blisters and as part of a keel fairing system. If Interfill Epoxy Filler is used below the waterline it must be overcoated with four coats of Interprotect 2000E/2001E. The cured epoxy has excellent solvent resistance and will not be attacked by the strong solvent in two-part polyurethanes or epoxies. NOTE: Interfill 830 is a TWO PART epoxy. In order for this product to work properly, a Reactor (fast or standard cure) MUST be purchased in addition to the Base.
[2 of 2 customers found this review helpful]
a bit stiff
By pegasus
from Long Island NY on 8/29/2008
from Long Island NY on 8/29/2008
Pros:
Protects Well, Weather Proof
Cons:
Too stiff
Best Uses:
Indoor, Outdoor
Describe Yourself:
Recreational
Bottom Line:
No, I would not recommend this to a friend
Comments about Interlux Interlux - Interfill 830 Fast Cure Epoxy Profiling Filler:
This product works well, but its working consistency is a bit stiff to be able to smoothly fair the repaired area with the surrounding gelcoat. The overfill is a bit thick and requires some effort (sanding) to remove.
I prefer Interlux Watertite for filling small blemishes in the gelcoat - it goes on like mayonnaise and is easy to manage with a spatula.