3M Product Reviews and Ratings - Glues and Adhesives - 3M Scotch-Weld DP8005 Acrylic Adhesive from Jamestown Distributors

Buy the 3M Scotch-Weld DP8005 Acrylic Adhesive on http://www.jamestowndistributors.com/

Print This Page

3M Scotch-Weld DP8005 Acrylic Adhesive image

(based on 4 ratings)

Read All Reviews

Brand: 3M

Located in: Epoxy and Adhesives, Glues and Adhesives

3M Scotch-Weld DP8005 Acrylic Adhesive is a two-part structural formulation (10:1 mix ratio by volume) that bonds Low Surface Energy plastics (like polyethylene or polypropylene) together or with other materials without surface pretreatment. 3M's high-strength Scotch-Weld Structural Adhesives are fundamentally load-bearing formulations. Bond strength is often as strong as, or stronger than the materials joined.

More information for the 3M Scotch-Weld DP8005 Acrylic Adhesive

Review Snapshot®

Avg. Customer Rating:

3.5 stars

(based on 4 reviews)

67% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Pros:

Easy to use(3)

So far, so good

By Jim the Chemist from Cedar Rapids, IA on 2/9/2011

Pros:

Easy to Use

Describe Yourself:

Professional

Was this a gift?:

Comments about 3M 3M Scotch-Weld DP8005 Acrylic Adhesive:

Used this adhesive to combine two disks of polypropylene together. The adhesive has been exposed to boling water many times and then cooled repeatedly. So far, so good. Only time will tell if the product will hold up.

Storage of partially used container

By kbaybob

from Kaneohe, HI on 8/26/2010

Pros:

Easy to Use

Describe Yourself:

Advanced

Bottom Line:

Yes, I would recommend this to a friend

Comments about 3M 3M Scotch-Weld DP8005 Acrylic Adhesive:

Rather than replacing the cap to save unused material, it is probably better to just leave the applicator mixing nozzle in place and let the material harden in the nozzle and seal itself. A tiny bit of activator contacting the other part at the opening of the tubes will harden and make it impossible to get the rest of the material out in the future. For long term storage, refrigeration will extend the shelf life. One source at 3M said freezing was OK, but another who seemed more knowledgeable said that refrigeration is good but freezing will damage the catalyst.

Did the job for me

By jb from Goldsboro, NC on 4/25/2010

Pros:

Easy to Use

Cons:

expensive

Best Uses:

Repair polyethelene tank

Describe Yourself:

Casual/ Recreational

Bottom Line:

Yes, I would recommend this to a friend

Comments about 3M 3M Scotch-Weld DP8005 Acrylic Adhesive:

used to repair hydraulic reservoir (uses Mobil 1 synthetic engine oil). Had tried many other products to no avail. Worked good for me.

[0 of 1 customers found this review helpful]

Did not work

By uncle Al from Eureka, CA on 5/10/2009

Cons:

Difficult to Use, Ineffective

Describe Yourself:

Recreational

Bottom Line:

No, I would not recommend this to a friend

Comments about 3M 3M Scotch-Weld DP8005 Acrylic Adhesive:

I was told by the boat manufacturer this would seal a small leak......it did not.

Customer Reviews about the 3M Scotch-Weld DP8005 Acrylic Adhesive at Jamestown Distributors