Buy the 3M Scotch-Weld EPX Plus II 10:1 Plunger on http://www.jamestowndistributors.com/
Print This Page
Print This Page
Brand:
3M
Located in:
Epoxy and Adhesives, Glues and Adhesives
3M Scotch-Weld EPX Plus II 10:1 Plunger is required to properly dispense 3M Scotch-Weld DP8005 and DP8010 Plastic Adhesives.
Used with 8005
By Matski from Iowa on 8/3/2010
Pros:
Easy to Use
Describe Yourself:
Casual/ Recreational
Bottom Line:
Yes, I would recommend this to a friend
Comments about 3M 3M Scotch-Weld EPX Plus II 10:1 Plunger:
As an engineer, I did a bit of research on bonding polypropylene, even going to pH D friend from 3M. The 3M gun was well designed and easy to use. 150-grit prep, alcohol wash, and then glue. Also used fiber glass cloth to reinforce some areas (not pretty, but tough) and the results were great. Highly recommend the Scotch Weld 8005 for hard-to bond products.