Buy the 3M Scotch-Weld EPX Plus II 10:1 Mixing Nozzle on http://www.jamestowndistributors.com/
Print This Page
Print This Page
Brand:
3M
Located in:
Epoxy and Adhesives, Glues and Adhesives
3M Scotch-Weld EPX Plus II 10:1 Mixing Nozzle simultaneously meters, mixes, and dispenses 3M Scotch-Weld DP8005 and DP8010 Plastic Adhesives. The adhesive is extruded through a static mixing nozzle, which ensures that the two components are mixed together thoroughly every time. The mixing nozzle can be adapted to extrude different bead diameters by cutting the tip. Sold (6) to the pack.
Used with DP8005
By Matski from Iowa on 8/3/2010
Pros:
Easy to Use
Describe Yourself:
Casual/ Recreational
Bottom Line:
Yes, I would recommend this to a friend
Comments about 3M 3M Scotch-Weld EPX Plus II 10:1 Mixing Nozzle:
As an engineer, I did a bit of research on bonding polypropylene, even going to pH D friend from 3M. The 3M gun was well designed and easy to use. 150-grit prep, alcohol wash, and then glue. Also used fiber glass cloth to reinforce some areas (not pretty, but tough) and the results were great. Highly recommend the Scotch Weld 8005 for hard-to bond products.