Print This Page
Customers most agreed on the following attributes:
[1 of 1 customers found this review helpful]
from Chesapeake Bay, Maryland on 7/23/2009
Comments about Plexus Plexus MA 310 High Strength Plastic Adhesive:
Use it in difficult situations, especially bonding plastic/fiberglass to metal. Also very good for hull repairs. No real prep needed for site and works well even with moisture or oil contamination. Used it to repair 3 inch hole in hull of a Hunter composite sailboat along with fiberglass mesh. Easy to mix, sets relatively quickly but working time (approx 15 min) is adequate. Can be filed or sanded easily and can put boat back in water within the hour.
While it is not cheap, it is the adhesive of choice for the really difficult bonding tasks or repairs.
from New Canaan, CT on 3/25/2009
Comments about Plexus Plexus MA 310 High Strength Plastic Adhesive:
Nothing bonds plastic to metal like this adhesive. Cures quickly. The smell will knock you for a loop. Use a good charcoal filter mask and nitrile gloves. Don't get it on you.
[0 of 1 customers found this review helpful]
from Montpelier, VA on 9/10/2008
Comments about Plexus Plexus MA 310 High Strength Plastic Adhesive:
This product is great in assembling plastic based RC sailboats such as the Soling One Meter from Victor products. There are many wood to styrene bonds in the construction of this model. This stuff bonds to styrene better than CA and West epoxy. A test of the product that I conducted can be seen at [@]
from SLC on 8/7/2008
Comments about Plexus Plexus MA 310 High Strength Plastic Adhesive:
We used this to attach rotaloc bolts to fiberglass. It works great. Smelly stuff though.