Buy the Interlux Interprotect 2000E/2001E Epoxy Primer on www.jamestowndistributors.com/ 
Print This Page
Print This Page
Brand: Interlux
Online Retailer ID: 113
Located in: Paints, Primers Sealers Undercoats
Interlux InterProtect 2000E is a unique two-part epoxy designed to reduce the potential of water absorption by fiberglass hulls. InterProtect is unique among epoxies because it has Micro-Plates, a protective barrier within its film to slow down water permeation.
This product worked great,
By David-Master carpenter from Crystal River, Fl on 9/12/2008
Pros:
Ergonomic Grip, Even Paint Distribution
Cons:
Smells like epoxie
Best Uses:
Large Areas, Small Areas
Describe Yourself:
Professional
Bottom Line:
Yes, I would recommend this to a friend
I am restoring an old fiberglass sail boat;it had alot of small blisters.I striped,sanded,epoxied, and then applied five coates of INTREPROTECT 2000. I then applied anti-fouling.LOOKES LIKE A NEW BOAT.
My Can says...
By learning the hard way
from Tillamook, OR on 7/25/2008
from Tillamook, OR on 7/25/2008
Cons:
Vapors sickening
Best Uses:
Bottom sealer
Describe Yourself:
Do-It-Yourself
Bottom Line:
Yes, I would recommend this to a friend
My can says 5 hour recoat, upto 15 hours. After 15 hours you MUST sand.
Not sure what the TWO WEEK recoat mentioned means...?
Requires FOUR complete coats.
It's alot of work and timing to get it right.
BUT, once your done, your done.
Vapors are toxic, I'm switching to FULL face mask. Change filters as soon as you can smell it!
Believe me, it'll hit your lungs like a ton of bricks!
I chose to persevere, big mistake.
Easy to sand. Makes for a great finish.
By RB from Minnesota on 3/6/2008
Pros:
Sands easily.
Cons:
Messy
Best Uses:
Boat bottoms and foiils.
Describe Yourself:
Do-It-Yourself
Bottom Line:
Yes, I would recommend this to a friend
A thick primer that sands easily to make a nice smooth finish before final painting. Added bonus of preventing blisters.