Print This Page
Brand:
System Three
Located in:
Paints, Primers Sealers Undercoats
System Three WR-155 is a high build waterborne two-part epoxy primer specifically formulated as a sandable base for System Three topcoats. WR-155 contains corrosion inhibitors and is opaque and lead-free. WR155 is non-flammable and contains no hazardous air pollutant solvents (HAPS) or heavy metals. It is low VOC and cleans up with water. WR-155 Primer may be used over polyester or epoxy resin surfaces, and properly prepared wood and metal surfaces. Use the primer to provide a smooth, uniform surface for the System Three polyurethane WR-LPU Topcoat. It can also be used to help poor hiding topcoats look uniform and opaque. This product is available in a grey color only in quarts and gallons.
Top Notch
By I do not use nicknames
from Norwalk, CT on 7/12/2009
from Norwalk, CT on 7/12/2009
Pros:
Dries fast, Even Paint Distribution, Fills micro imperfections, Superior surface
Cons:
Leaves roller dimples
Best Uses:
Colored primer coats
Describe Yourself:
Professional
Bottom Line:
Yes, I would recommend this to a friend
Comments about System Three System Three WR-155 Epoxy Primer:
Using water borne wood finish products for furniture on a regular basis, this was the first water borne epoxy primer I have used. It was easy to mix and apply but be aware, the pot life is greatly limited by temp/humidity. Plan on discarding the first applicators and if applying in 80 degree F weather, use a 2-3 hr max pot life. Also, the coverage was greater than expected as it refers to recommended film tickness. The gallon can provides 2 coats of rolled on coverage for the square footage cited.