Buy the Interlux 202 Fiberglass Solvent Wash on http://www.jamestowndistributors.com/ Print This PagePrint This Page
Interlux 202 Fiberglass Solvent Wash image
 
(based on 3 ratings)
Brand: Interlux
Located in: Paints, Thinners and Solvents
202 Fiberglass Solvent Wash is a combination of several solvents, some of which are very slow to evaporate from the surface of gel coat being wiped. This characteristic is very important because the wax contaminants must stay in solution so that it can be wiped from the surface before it dries. 202 Solvent wash is also an excellent parts clean up and multi-purpose wipe down solvent. Use before painting bare fiberglass gel coats. This solvent removes mold release agents, wax, oil, and grease. Leaves a properly cleaned surface for optimal paint adhesion. 202 Solvent is also used for cleaning painting tools.
Review Snapshot®
Avg. Customer Rating:
 
4.7 stars
(based on 3 reviews)
100% of respondents would recommend this to a friend.
 
Awesome stuff!
By poolmanVerified Reviewer from Schriever, La on 5/15/2010
Pros:
Easy To Clean
Cons:
None
Best Uses:
Small Areas
Describe Yourself:
Beginner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Interlux Interlux 202 Fiberglass Solvent Wash:

This is some awesome stuff! Very powerful and does what it says! Highly recommend this!!

 
great product
By catfish44 from leesburg fl on 4/10/2010
Pros:
Easy To Clean
Best Uses:
Small Areas
Describe Yourself:
Casual Do-It-Yourselfer
Bottom Line:
Yes, I would recommend this to a friend

Comments about Interlux Interlux 202 Fiberglass Solvent Wash:

great product. cleaned old wax and dirt off fiberglass finish on my boat.

[1 of 1 customers found this review helpful]

 
Great stuff!
By Captain Dick from Danbury, CT on 5/1/2008
Pros:
Cleans vinyl too, Works as advertised
Best Uses:
Clean stained moldy vinyl, Remove wax from hull
Bottom Line:
Yes, I would recommend this to a friend

Comments about Interlux Interlux 202 Fiberglass Solvent Wash:

I was using this product to prep a hull for boot-stripe paint. The stern of my boat has a 3" thick vinyl rub-rail which had 10+ years of stain and mold that had resisted all vinyl cleaners I had tried. While removing wax from the hull, the solvent accidentally touched the vinyl and, voila, cleaned it back to white where it touched! I used it to restore the whole piece of vinyl to like-new condition in just a few minutes, and it did not leave the vinyl sticky. An unexpected bonus from a good product.

Powered by PowerReviews
Copyright © 2011 Jamestown Distributors All Rights Reserved. Do not republish contents.