Customers most agreed on the following attributes:
Comments about Epifanes Epifanes Wood Finish Gloss Varnish:
Great product for build coats. Too thick from can, must add thinner. If applying in the tropics use 333 as the thinner and it won't dry too quickly, leaves a very smooth finish when applied with a quality badger bristle brush. I usually seal the teak first with a few coats of Smith's CPES, then use this for the build coats so I don't need to sand between layers, then do two top coats of Epifanes Clear, sanding between. You get a mirror finish when done.
Comments about Epifanes Epifanes Wood Finish Gloss Varnish:
Selected this based on a Practical Sailor review. Was not disappointed. Preparation is key, mixing with thinner in reasonable ratios (not necessarily exact) works really well. Used on trim and large flat areas. With just 4 coats or more, looked great all season, even through blazing sunshine. Changed the way my boat looks.
Comments about Epifanes Epifanes Wood Finish Gloss Varnish:
I apply thinned preliminary coats as advised on the can, wet sanding between coats using 320 grit with mineral spirits lubricant. Sometimes the finish is slow to dry on the edge of ebony fingerboards and painting a little Japan dryer on the wood or first coat of finish there with a Q-tip solves this problem. If the final coat is thinned, it is easier to rub out. Incredibly durable and the instruments sound great.
Guitar finished with Epifanes Wood Finish Gloss
Tags: Made with Product
Comments about Epifanes Epifanes Wood Finish Gloss Varnish:
I use this product on numerous tropical hardwoods, usually after having applied tung oil (and let dry completely) and it gives an excellent finish. Gives a depth and warmth to the wood with excellent clarity and a nice feel to the touch. Quite thick requiring dilution, which means that there is a lot of solids unlike the domestic products, and a good deal of coverage.
[4 of 4 customers found this review helpful]
Comments about Epifanes Epifanes Wood Finish Gloss Varnish:
I have been using this product ever since I bought my boat. I use on all the exterior teak on my boat and follow up 6 or 8 coats with a finish coat of Epifanes clear varnish. This gives a beautiful gloss finish. I start with a first coat thinned with 10 to 20% penetrol and thinner.