Buy the Shields Marine Exhaust / Water Hose (No Wire) on http://www.jamestowndistributors.com/
Print This Page
Print This Page
Brand:
Shields
Located in:
Plumbing, Hose and Hose Clamps
Shields premium fabric-reinforced, marine hose is made from black, heavy-walled, synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, and salt water.
Improved compounding allows this hose to be used in marine water and wet exhaust applications. Use where wire support is unnecessary. Designed for engine water circulation, heat exchanger, heavy duty discharge lines, and wet exhaust connections. Compounded to resist engine heat, exhaust fumes, ozone, mild acids, engine coolant, and salt water.
All diameters sold in 12-1/2 foot lengths.
Good w/ Considerations
By [@] from Seabrook, Texas on 4/29/2010
Pros:
Durable, Easy To Install, Easy To Use
Describe Yourself:
Professional
Bottom Line:
Yes, I would recommend this to a friend
Comments about Shields Shields Marine Exhaust / Water Hose (No Wire):
Install without TIGHT bends, must not kink or crush over time. For wet marine exhausts a wire reinforced hose is best but harder to work with.
Carefully match any hose to the fitting over which it slips. Must be a tight fit !!
Use two hose clamps for all connections below water line.
Easy to Use
By Bruce the Boat Builder from Chattanooga, Tennessee on 11/24/2009
Pros:
Attractive Design, Durable, Easy To Install, Easy To Use
Cons:
none
Best Uses:
Boats
Describe Yourself:
Avid Do-It-Yourselfer
Bottom Line:
Yes, I would recommend this to a friend
Comments about Shields Shields Marine Exhaust / Water Hose (No Wire):
Very easy to use, especially compared to a ridged exhaust system.