Buy the Shieldsflex II Marine Water and Exhaust Hose on http://www.jamestowndistributors.com/ Print This PagePrint This Page
Shieldsflex II Marine Water and Exhaust Hose image
 
(based on 6 ratings)
Brand: Shields
Located in: Plumbing, Hose and Hose Clamps
Shieldsflex II Series Marine Water and Exhaust Hose can be used on engine intakes, wet exhaust connections where bends or longer lengths are required, bilge pump intake and discharge, scupper lines, toilets, and holding tanks. Shieldsflex II features a black synthetic rubber tube and cover. Wire is used to reinforce the hose between plies of synthetic cord. These hoses are resistant to odors, permeation, abrasion, exhaust fumes, ozone, mild chemicals, antifreeze, and saltwater.
Review Snapshot®
Avg. Customer Rating:
 
4.5 stars
(based on 6 reviews)
100% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Pros:
Durable(5)
Describe Yourself:
Avid do-it-yourselfer(3)
 
Highest Quality Material
By Bear from Ohio on 6/17/2010
Pros:
Durable
Describe Yourself:
Avid Do-It-Yourselfer
Bottom Line:
Yes, I would recommend this to a friend

Comments about Shields Shieldsflex II Marine Water and Exhaust Hose:

The Schieldsflex II Marine Water and Exhaust hose is really a top notch product. I would put it up against any other brand for more than twice the price. Be sure to measure carefully, as there is no strech to the diameter of the tubing. Great value.

[1 of 1 customers found this review helpful]

 
all pourpose engine hose
By Sud-ZVerified Reviewer from Perkiomenville, PA on 2/3/2010
Pros:
Durable
Cons:
Difficult To Install
Describe Yourself:
Avid Do-It-Yourselfer
Bottom Line:
Yes, I would recommend this to a friend

Comments about Shields Shieldsflex II Marine Water and Exhaust Hose:

Good all around engine hose. Does not bend too easy.

[1 of 2 customers found this review helpful]

 
Right stuff
By Strider 1Verified Reviewer from Tennessee River on 10/6/2009
Describe Yourself:
Avid Do-It-Yourselfer
Bottom Line:
Yes, I would recommend this to a friend

Comments about Shields Shieldsflex II Marine Water and Exhaust Hose:

If you are below the water line and want to make sure you are providing maximum security, this is the intake hose you want. Good positive seal with opposing clamps, good bend radius, sturdy pro-grade hose.

[1 of 1 customers found this review helpful]

 
Good Product
By Capt. ScullyVerified Reviewer from Howell, NJ on 8/10/2009
Pros:
Durable, Easy To Install, Easy To Use
Best Uses:
Boat exhaust
Describe Yourself:
Professional
Bottom Line:
Yes, I would recommend this to a friend

Comments about Shields Shieldsflex II Marine Water and Exhaust Hose:

Good product for replacement or new installation. The wire reinforced can be a little tough if the fitting is slightly bigger than the hose ID. The wire version won't stretch very much.

 
Industry Standard
By Jess from Annapolis, MD on 7/21/2009
Pros:
Durable, Easy To Install, Easy To Use
Best Uses:
boat
Describe Yourself:
Casual Do-It-Yourselfer
Bottom Line:
Yes, I would recommend this to a friend

Comments about Shields Shieldsflex II Marine Water and Exhaust Hose:

Used to replace hose that was 23 years old.

[2 of 2 customers found this review helpful]

 
High quality hose is worth the cost
By ToddStaff Reviewer from Eureka, CA on 7/18/2008
Pros:
Dependable, Durable, Long life, Rugged
Cons:
none
Best Uses:
Marine exhaust systems
Describe Yourself:
Professional
Bottom Line:
Yes, I would recommend this to a friend

Comments about Shields Shieldsflex II Marine Water and Exhaust Hose:

Marine exhaust hose like the Shields brand is the real deal. Never, ever substitute ordinary rubber hose for an exhaust application. Keep the water on the outside of your boat where it belongs. Inferior parts give inferior results. Don't cheap out. This stuff is good.

Powered by PowerReviews
Copyright © 2011 Jamestown Distributors All Rights Reserved. Do not republish contents.