Print This Page
Brand:
Forespar
Located in:
Plumbing, Marine Water and Waste Holding Tanks
Installing a vented loop will ensure that fluids will not siphon from tank to tank. Forespar Marelon Vented Loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one-way valve is designed to seal properly if particulate matter is present in fluids. Marelon is the only synthetic material to pass the stringent Marine U.L. testing. All critical hose connections should be double clamped at both ends. Ideally, the hose clamp screws should be mounted opposite one another for maximum security. Use the highest quality AWAB hose clamps for longest life and best performance.
[1 of 1 customers found this review helpful]
Marelon does not corrode
By Dudley
from Dracut, MA on 4/22/2008
from Dracut, MA on 4/22/2008
Pros:
Does not corrode, Impervious, Light weight, Prevent siphoning, Strong
Cons:
none
Best Uses:
Boat head system
Bottom Line:
Yes, I would recommend this to a friend
Comments about Forespar Forespar Marelon Vented Loops:
Marelon plumbing components are rugged, well made and do not conduct electricity- no bonding needed. Much lighter than the bronze equivalent part.