Buy the Rule-Mate Fully Automated Bilge Pumps on http://www.jamestowndistributors.com/ Print This PagePrint This Page
Rule-Mate Fully Automated Bilge Pumps image
 
(based on 3 ratings)
Brand: Rule Industries
Located in: Plumbing, Pumps
Rule-Mate Fully-Automated Bilge Pumps are available in 500, 750, 1100, 1500 and 2000 gph (gallons-per-hour) capacities. These are quiet and compact bilge pumps that activate when the water level is 2-1/8". The pump and solid state water sensing switch are in a single, compact housing. The sophisticated switch senses the dielectric properties of water but will not pump oil. Unlike the standard computerized automatic pumps, there's no on/off cycling so no power is used until the pump comes on. A detachable strainer makes clearing debris quick and easy with easy access to the impeller area.
Review Snapshot®
Avg. Customer Rating:
 
4 stars
(based on 3 reviews)
67% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Pros:
Quiet(3)
 
Rule 1100 Bilge Pump
By High Tide JackVerified Reviewer from Ninilchik, Alaska on 8/13/2011
Pros:
Quiet
Cons:
Not Stable
Describe Yourself:
Handyman
Bottom Line:
No, I would not recommend this to a friend

Comments about Rule Industries Rule-Mate Fully Automated Bilge Pumps:

The pump installed easily but after the pump came on the 1st time to pump it then would not shut off. It did this twice and never has not done it. Had to disconnect the power terminal to kill it.
Pump coming back out......search for a replacement

 
Rule pumps are reliable
By BahmaVerified Reviewer from Abaco. Bahamas on 2/18/2011
Pros:
Powerful, Quiet
Describe Yourself:
Do-It-Yourself
Bottom Line:
Yes, I would recommend this to a friend

Comments about Rule Industries Rule-Mate Fully Automated Bilge Pumps:

Excellent device

[5 of 6 customers found this review helpful]

 
The only pump I'll ever use
By CaptainSilvaStaff Reviewer from Riverside, RI on 1/28/2009
Pros:
Fully Automatic, Internal Float Switch, Quiet
Best Uses:
Bilges
Describe Yourself:
Do-It-Yourself
Bottom Line:
Yes, I would recommend this to a friend

Comments about Rule Industries Rule-Mate Fully Automated Bilge Pumps:

I put two of these on my boat and eliminated the older pumps I had with the flimsy old-school float switches. A simple two wire hookup is all it takes. Anyone can install these.

They only come on when the water reaches a certain height, not every 2.5 minutes like other pumps that can drain the battery. I also have them connected to a switch at the dash in case I want to use them manually.

Powered by PowerReviews
Copyright © 2011 Jamestown Distributors All Rights Reserved. Do not republish contents.