Buy the Type H High Speed Steel Countersinks on http://www.jamestowndistributors.com/
Print This Page
Print This Page
Brand:
W.L. Fuller
Located in:
Power Tools, Drill Bits
High Speed Steel Countersinks are excellent for cutting wood, plastics and metal. They are available with included angle of 60, 82, 90, 100 or 120 degrees. 82 degrees is the Standard size unless otherwise requested. The four-blade construction have shorter, more rugged blades to reduce breakage and are designed to Countersink in metals and hardwoods. They are adjustable up and down on twist drills and are held in place by two hex-socket set screws which tighten into the flute of the drill.
[0 of 1 customers found this review helpful]
Clogs!
By violin dude from NYC on 10/3/2008
Pros:
well made
Cons:
Clogs like crazy
Best Uses:
Without stop ring
Describe Yourself:
Professional
Bottom Line:
No, I would not recommend this to a friend
Comments about W.L. Fuller Type H High Speed Steel Countersinks:
Clogs like crazy with the stop ring in Ipe. Had to remove stop to use. Size is for free part of screw not beyond...for that you'll need a smaller bit.