Buy the G10 Fiberglass Board on http://www.jamestowndistributors.com/ Print This PagePrint This Page
G10 Fiberglass Board image
 
(based on 3 ratings)
Read All Reviews
Brand: Jamestown Distributors
Located in: Wood, Foam, Starboard, Reinforcing Boards
G10 fiberglass boards are made of a special glass epoxy laminate that has extremely high strength. G10 fiberglass is used in marine applications due to its superior strength, moisture resistance, and excellent electrical and fire insulation. Fiberglass boards make excellent non-corrosive backing plates for high load deck hardware or bond to engine room bulkheads to hold mounting brackets. G10 boards are sold in 1/4 and 1/2 inch thickness. G-10 is similar in strength and density to starboard, but because it is formed from epoxy resin, it bonds easily using most two-part epoxies. The 3ft x 4ft boards cannot be shipped by UPS and must go by common carrier!
More information for the G10 Fiberglass Board
Review Snapshot®
Avg. Customer Rating:
 
5 stars
(based on 3 reviews)
100% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Pros:
Easy to use(3)
Describe Yourself:
Advanced(3)
 
G10 for hull repairs, backing blocks
By Enginecom from MA on 7/12/2011
Pros:
Easy to Use, Weather Proof
Describe Yourself:
Advanced
Was this a gift?:
No
Bottom Line:
Yes, I would recommend this to a friend

Comments about Jamestown Distributors G10 Fiberglass Board:

Converted a twin inboard to single. Used G10 to close up holes from shaft tubes. Bolted and bedded them in using same holes that held in the bronze shaft logs. Also great for backing blocks as it does not deteriorate. Only drawback is G10 is hard on cutting and boring tools. Have friends who repaired keels and other FRP parts using this material due to it being stabile and flat. Stronger than original FRP.

 
Solid product
By Captain Glenn from Cincinnati, Ohio on 2/23/2011
Pros:
Easy to Use, Great product, Protects Well, Visually Pleasing, Weather Proof
Best Uses:
Outdoor
Describe Yourself:
Advanced
Was this a gift?:
No
Bottom Line:
Yes, I would recommend this to a friend

Comments about Jamestown Distributors G10 Fiberglass Board:

I used this product in the entrance way to my salon on a 1973 36' Chris Craft and it made a solid setup.

Images shared by: Captain Glenn

Image Thumbnail

Tags: Made with Product, Using Product, Picture of Product

[1 of 1 customers found this review helpful]

 
Great product
By Rojo GuioVerified Reviewer from Kiln, MS on 4/2/2010
Pros:
Easy to Use
Describe Yourself:
Advanced
Bottom Line:
Yes, I would recommend this to a friend

Comments about Jamestown Distributors G10 Fiberglass Board:

I used this to build up a surface mount for a trolling motor on a flats fishing boat that had no access for conventional mounting. It was laminated with west system epoxy to double the thickness then laminated to the deck with the same west epoxy but with colloidal silica added. It made a extremely strong mount. Use a new saw blade to cut.

Customer Reviews about the G10 Fiberglass Board at Jamestown Distributors
Powered by PowerReviews
Copyright © 2011 Jamestown Distributors All Rights Reserved. Do not republish contents.