Dock Hardware Galvanized Angle

The Tie Down Engineering Galvanized Angle is used to attach all cross supports. The Angle plate measures...

Dock Hardware Galvanized Outside Pipe Holder

The Tie Down Engineering Galvanized Outside Pipe Holder (3 inch O.D.) bolts to the outside of the dock. Four...

Dock Hardware Galvanized Outside Corner End

The Tie Down Engineering Galvanized Outside Corner End is used at the ends of fingers and docks. The Outside...

Dock Hardware Galvanized Inside Corner

The Tie Down Engineering Galvanized Inside Corner should be used with one of the outside corners listed...

Dock Hardware Galvanized Female T-Connector

The Tie Down Engineering Galvanized Female T-Connector has two welded 1/2" thick tabs. The Female T-Connector...

Dock Hardware Galvanized Connector Pin Set

The Tie Down Engineering Galvanized Connector Pin Set is used to connect Male and Female T Connectors. The...

Dock Hardware Galvanized Male T-Connector

The Tie Down Engineering Galvanized Male T-Connector has one welded 1/2" thick tab. The Male T-Connector base...

Dock Hardware Galvanized Washer Plate

The Tie Down Engineering Galvanized Washer Plate is used to reinforce timber connections. The Washer Plate...

Dock Hardware Galvanized Chain Holder

Dock Hardware Galvanized Chain Holder bolts to side of dock with 3/8" Galvanized Carriage Bolts. Use...

Dock Hardware Galvanized Heavy Duty Piling Hoop

The Tie Down Engineering Galvanized Heavy Duty Piling Hoop is designed for pilings up to 12 inches in...

Dock Hardware Galvanized Inside Corner and Pipe Holder

The Tie Down Engineering Galvanized Inside Corner and Pipe Holder has elongated holes for easy fit-up and...

Dock Hardware Galvanized Outside Corner Female T-Connector

The Tie Down Engineering Galvanized Outside Corner Female T-Connector has two welded 1/2" thick tabs. The...

Dock Hardware Galvanized Outside Corner Male T-Connector

The Tie Down Engineering Galvanized Outside Corner Male T-Connector has one welded 1/2" thick tab. The Male...

Tie Down Back-up Plate

Tie Down Back-up galvanized plates are used on docks as reinforcing plates to back up a single male or female...

Tie Down Hoop Roller Pile Holder

This 14", commercial-grade, steel hoop is rugged dock hardware for areas with a lot of wind, current or...