Cole Hersee 85A Continuous Duty Solenoid
Cole Hersee Cole Hersee
  • Cole Hersee 85A Continuous Duty Solenoid

Cole Hersee 85A Continuous Duty Solenoid

Cole Hersee continuous duty 85a solenoid. Insulated with steel housing. Has normally open contacts with one circuit: OFF-ON.
 
IN STOCK - Available for pickup  
$28.10 / ea
qty.   
$28.10
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

SOLENOID TYPES

Many remote mount solenoids look identical on the outside.
However, they can be very different on the inside. Beside the different internal circuits, these can be rated for continuous duty or intermittent duty use.

Continuous duty solenoids are wound with very fine wire and draw very little amperage. The contacts in continuous duty solenoids will usually have a lower amperage rating than that of the intermittent duty type. These are normally used as tilt trim relays. This type of solenoid can also be used for a variety of applications where a remote relay is needed to power a motor or other device.

Intermittent duty solenoids are wound with much heavier wire and draw more amperage. The contacts have a very high amperage rating. If these stay energized for extended periods of time they heat up and eventually burn out the coil inside the solenoid. This type of solenoid is normally used as a starter motor relay.

BRAND: Cole Hersee
Type: Solenoids
Related Items:
JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog