System Three SilverTip Laminating Epoxy Slow Hardener

Silvertip slow hardener is specially formulated for System Three SilverTip Laminating Resins. Use at a simple 2:1 volume ratio with either and at temperatures as low as 35 degrees F with no limitations on humidity. This hardener is available in a variety of sizes from pints to 55 gallon drums and features a slow cure time.

$26.37

$43.33

$69.72

$120.00

$255.75

$420.32

$1,997.68

$3,500.00

The item was added to your wishlist.

The item was added to your shop cart.

BRAND:

System Three

Resin Type:

Hardeners

Type:

Hardener

Questions & Answers about System Three SilverTip Laminating Epoxy Slow Hardener:

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

2014-03-16WILLIAM MONTICONE asked: looking for system 3 silver tip epoxy slow hardener, this is part "B" but I am having trouble finding the part "A" epoxy in Silver tip that goes with it. I am looking for a 1 pint quanity of part "A" epoxy and 1\2 pint of part "B" hardener but can only find str-0901B14 the slow hardener, where is the part "A" epoxy?
Bill

+Expand Answers

2014-03-17RON REISNER: According to the on-line catalog, the smallest quantity of Silvertip epoxy resin offered by Jamestown is one quart (STR-0900A16), and the smallest quantity of Silvertip epoxy slow hardener is one pint (STR-0901814).

2014-02-27A shopper asked: How much coverage/square foot, does a 1/2 gallon of laminating resin get?

+Expand Answers

2014-02-28Rick White: ESTIMATING USAGE
The following will serve as a guide for estimating the amount of SilverTipâ?¢ Series product you'll need. The key to any estimate is a reasonably accurate idea of the surface area involved. The numbers given are in square feet of coverage per gallon of mixed resin and hardener except as noted. Divide by 40 to convert figures to square meters per liter.
SILVERTIP COATING AND LAMINATING RESIN
Coating Wood First Coat Subsequent Coats
Softwood Plywood/Veneer 250 400
Hardwood Plywood/Veneer 325 400
Vertical Surface-maximum non-sag 500 500
Fiberglassing
(sealer, wet-out & fill coats)
4 ounce cloth 150 300
6 ounce cloth 130 250
10 ounce cloth 100 170
Biaxial Tape 32 40

Special order items are not stocked and are ordered direct from the manufacturer. They are non-returnable, may take 2-4 weeks, price and shipping charges subject to change.