Conbraco 90 Degree Bronze Thru-Hull w/ Hose Fitting
Conbraco Conbraco
  • Conbraco 90 Degree Bronze Thru-Hull w/ Hose Fitting

Conbraco 90 Degree Bronze Thru-Hull w/ Hose Fitting

Conbraco 90 degree bronze thru-hull assemblies are ideal for above the waterline applications like cockpit and fish box drains. Assembly features a 90 degree bend with a barbed hose fitting. This rugged thru-hull also has a unique bonding tab that provides protection for galvanic corrosion.
 
IN STOCK - Available for pickup  
$55.64 / ea
qty.   
$55.64
$55.82
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Not For Below The Waterline

Part Number

 

Hose Size

 

Min/ Max Hull Thickness

 
CNN-65BF859  3/4in  .33 - .72 
CNN-65BF855  1in  3/8in - 1 1/4in 
CNN-65BF856  11/4in  3/8in - 1 1/4in 
BRAND: Conbraco
Metal: Bronze
Type: Thru-Hulls
4.5 2

REVIEW SNAPSHOT®

by PowerReviews
Conbraco 90 Degree Bronze Thru-Hull w/ Hose Fitting
 
4.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

 
5.0

A perfect fitting for the job

By gallivanter

from North Vancouver, British Columbia

Verified Reviewer

Pros

  • Attractive Design
  • Durable
  • Easy To Install
  • Easy To Use

Cons

    Best Uses

      Comments about Conbraco 90 Degree Bronze Thru-Hull w/ Hose Fitting:

      These are excellent fittings, well made and finished with good wall thicknesses. I would certainly recommend them to anyone needing an above the waterline through-hull. My only comment is that in order to fit them into hulls with a thickness of less than about 3/8ths. of an inch thickness it is necessary to use a spacer piece inside the hull, a good idea in any case. I cut my spacers out of 3/8" thick, heavy duty plastic board. In my case a white, professional cook's cutting board using two appropriately sized hole saws for the outside and inside of the spacer. (Cut the outside hole first!) I used plenty of of Sikaflex sealant during installation.

      (1 of 1 customers found this review helpful)

       
      4.0

      Well Made Bronze Fitting

      By CHuglas Munechow

      from Long Island Sound

      About Me Casual Do-It-Yourselfer

      Verified Reviewer

      Pros

      • Durable
      • Easy To Use

      Cons

        Best Uses

          Comments about Conbraco 90 Degree Bronze Thru-Hull w/ Hose Fitting:

          I purchased these bronze thru hulls to replace a pair of 20 year old plastic Perko fittings. They are connect thru the hull and run to the scuppers of my sailboat. The construction is top notch, threads fit tightly and the barbed portion fits 1" inner diameter hose snugly. The interior portion of the fitting has a recessed notch which allowed an extra dollop of silicone to seal the connection. The exterior/threaded/male portion of the fitting is very long does not close completely and requires a rubber spacer to allow it to clamp tightly on any surface under 1/4" inch. I am a novice at boat repair and this is perhaps an industry standard, but was surprised that I had to purchase a spacer separately.[...]

          Displaying reviews 1-2

          Back to top

          Users Also Bought: