#8 S/S Wood Screws FP

	8 x 3/4 FSSWSFP8X3/4 WOOD SCR FLAT PHIL S/S 8 X 3/4 $10.56 / bx for 1 bx and more In stock (1 bx contains 100 units)   qty.
	8 x 1 FSSWSFP8X1 WOOD SCR FLAT PHIL S/S 8 X 1 $11.44 / bx for 1 bx and more In stock (1 bx contains 100 units)   qty.
	8 x 1-1/4 FSSWSFP8X11/4 WOOD SCR FLAT PHIL S/S 8 X 1-1/4 $16.50 / bx for 1 bx and more In stock (1 bx contains 100 units)   qty.
	8 x 1-1/2 FSSWSFP8X11/2 WOOD SCR FLAT PHIL S/S 8 x 1-1/2 $13.42 / bx for 1 bx and more In stock (1 bx contains 100 units)   qty.
	8 x 1-3/4 FSSWSFP8X13/4 WOOD SCR FLAT PHIL S/S 8 x 1-3/4 $17.75 / bx for 1 bx and more In stock (1 bx contains 100 units)   qty.
	8 x 2 FSSWSFP8X2 WOOD SCR FLAT PHIL S/S 8 X 2 $17.85 / bx for 1 bx and more In stock (1 bx contains 100 units)   qty.

Questions & Answers about #8 S/S Wood Screws FP: 2013-05-14 BARRY FARRIS asked: which screw has a smaller diameter shaft? 8 or 18? +Expand Answers 2013-05-14 STEVEN JACKSON: The larger the screw size the larger the diameter. #10 is larger than #8, etc. I am not familiar with #18, however, since that would be pretty large. Steve 2013-05-15 DWAYNE KULK: Screws are sized with the diameter number smaller to larger so 8 is smaller than 18. A number 14 happens to be 1/4" diameter 2013-05-15 JOHN JEPSON: 8 2013-05-19 TAYLOR WOODWORKING: 8 2013-03-16 A shopper asked: How do I change the screw size and length? +Expand Answers 2013-03-19 Kevin V: At this time we do not have a customer to answer your question. If you need assistance please contact customer service at 800-423-0030. 2013-03-04 CHUCK THOMPSON asked: I used to work in a boatshop in the 80's. The most common screw by far was the 1.25" X #8 SS FH phillips wood screw. We used them for everything and almost every "cleat" that was used for interior woodwork. My question is what is the standard for today's boatshop? Is this style screw still the gold standard for boat construction or are people chosing square or some other drive style and if so why? +Expand Answers 2013-03-06 JOHN JEPSON: Hi Chuck I use square drive all the time due to ease of use and the fact that the screw rarely strips. That being said, I have spoken to boat builders who swear by Phillips head. Hope that helps 2013-03-07 JACK COLLINGSWORTH: Chuck, Short answer is yes, it's my "go to" size for a lot of fastening needs anywhere near water. Gnawbone Jack 2013-03-07 STEVEN KIBLER: Chuck, I have been working in a yard for some time now, and these are still the best all around fasteners. There is always a box of these in the tool kit. Steve 2013-01-24 A shopper asked: What type of stainless are thes screws 302, 034 or 316 ? +Expand Answers 2013-01-24 Kevin V: Flat Head Phillips Drive18-8 stainless steel Marine grade 300 series stainless steel. 18-8 Stainless is the workhorse for modern boat building. 2012-06-22 A shopper asked: On screw boxes( for wood) the size is specified like this - 30x7. What does it mean? +Expand Answers 2012-06-22 WILLIAM BERNHARD: I'm not sure if the current boxes of screws I have now are from 2009 or not. Anyway there is no marking on them that says 30X7. Printed markings are for the grade of Stainless 18-8 and then the gauge number and length #8 3/4". Maybe its a metric measurement, wish I could be more helpful. Bill B. 2012-01-22 A shopper asked: i am drilling into an african hardwood with a #8 SS wood screw - do i need to pre-drill a hole or is it okay just to sink it right into the wood? pre-drilling is kind of a pain, so is there a wood screw that can be used which is designed to self-drill? Allen +Expand Answers 2012-01-23 GEOFFREY HOOTS: you have to predrill any wood to put a screw in to get a decent job 2012-01-23 ANSELM C WEBSTER: Predrilling is a lot less painful then snapping the head on the screw. I have built and restored boats and know this lesson all to well. What I do on a non tapered screws is to get out my caliper, measure the thickhess of the screw down the shaft of the screw then pick a drill bit that is just a tighter then this measurement. Make sure the drill bit is smaller then the shaft of the screw if the threads are removed. This method avoids the worry of misreading the drill bit size. On tapered screws I use a tapered drill bit with adjustable depth and countersink and run a quick test on a piece of scrap wood. to make sure the depth of the drill and the countersink work right with the screw. Hardwood is so expensive these days the I go the extra effort to make sure I don't mess up the wood....PREDRILL.......have fun. 2012-01-23 GREGORY MILLER: It better to per drill the hole with a counter sink for the screw head. It will look better and in the long run be easier. 2012-01-24 JOHN HEIDEREICH: Take the time to pre drill you will not split the wood or strip the screw. John 2011-12-28 BARBARA SCHECHTER asked: does this screw work with a #2 phillips head screwdriver? +Expand Answers 2011-12-28 JOHN GAUNTT: Yes. #2 Phillips should work fine. My experience is that only when you get over into the bronze screws that Phillis not work. 2011-12-28 Garrett Scott: Yes, these screws will work with a #2 Phillips driver. Garrett 2011-12-28 PHILIP WESSLING: 9/64 pilot and #2 bit, your good to go 2011-12-29 MARVIN REYNOLDS: Yes, a #2 phillips head screwdriver is the right tool for the #8 S/S Wood Screw. 2011-12-30 TED MORGAN: Yes. Be sure to dill a pilot hole and counter-sink a place for the head. If you try to force it in you will most likely strip out the X on the head of the bit. 2011-10-28 A shopper asked: how many in a box? +Expand Answers 2011-10-28 Ryan L: 1 bx contains 100 units

4.2 5