awlgrip primer spray reducers
Awlgrip Awlgrip
  • awlgrip primer spray reducers

Awlgrip Primer Reducer

These reducers are the standard component to be used with most AwlGrip Epoxy primers when using a spray application. *** FOR PROFESSIONAL USE ONLY ***
 
IN STOCK - Available for pickup  
$21.01 / qt
qty.   
$21.01
$49.98
$61.54
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
Theoretical Coverage: Sq. Feet/Gallon: 497 Sq. Feet at one mil dry. 165-248 Sq. Feet at recommended dry film thickness. Calculated for mixed base and converter, reduced 25%. Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage will vary according to equipment choice, application techniques, part size, and environment.

T0006 is a primer reducer, a standard epoxy reducer for spray application of 545 Primer, Awl-Quik, sprayable fairing compound, 30-y-94, and high build epoxy primer. Also recommended for Hullgard Epoxy Primer.

 

  • Recommended Wet Film Thickness: 7-10 mils (175-250 microns) 2 to 3 coats.
  • Recommended Dry Film Thickness: 2-3 mils (50-75 microns).
  • Recoatability: At 77°F/50% R.H. Spray: minimum with itself 1 hour, with other products 12 hours.
  • Brush Roll: with itself 12 - 14 hours, with other products 12 - 14 hours.
  • Maximum without sanding 24 hours. Sanding is recommended to improve adhesion and appearance.
  • Overcoat with AWLGRIP®/AWLCRAFT® 2000 Topcoats, HIGH BUILD Epoxy Primer, AWL-QUIK® Sanding Surfacer, ULTRA-BUILD® Primer, HULL-GARD® E.R., and HULL-GARD® W.B.
  • VOC: 850 g/lt or 7.1 lbs/gal

 

BRAND: Awlgrip
Type: Thinners and Solvents
Related Items:
JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog