awlgrip topcoat accelerator
Awlgrip Awlgrip
  • awlgrip topcoat accelerator

Awlgrip Topcoat Accelerator

Awlgrip Accelerators may be used to decrease dry and cure times in AwlGrip and AwlCraft 2000 Topcoats. Pro cure X-98 and X-138 are additives used in Awlgrip and Awlcraft 2000 topcoats. DO NOT USE IN PRIMERS. *** SUGGESTED FOR PROFESSIONAL USE ONLY ***
 
IN STOCK - Available for pickup  
$24.57 / ea
qty.   
$24.57
$23.84
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

 

  • Type: Accelerator additive
  • Packaging: 2 ounce bottles/12 per case
  • PRO-CURE#174 X-98 and PRO-CURE#174 X-138 are additives used in AWLGRIP#174 and AWLCRAFT#174 2000 Topcoats.
  • Mixing and Reduction: PRO-CURE#174 X-98 (73014) 1/2 liquid ounce per 2 gallons of mixed topcoat color base and converter.
  • This is the maximum amount; lesser quantities may be sufficient.
  • PRO-CURE#174 X-138 (73015) 1 liquid ounce per 2 gallons of mixed topcoat color base and converter.
  • This is the maximum amount; lesser quantities may be sufficient. Induction Time after Mixing: N/A
  • PRO-CURE#174 X-98 should only be used in spray applications.
  • PRO-CURE#174 X-138 may be used in both spray and brush applications.
  • Recoatability: AWLGRIP#174 Topcoats with a full add of PRO-CURE#174 X-98 may be recoated or taped in 4 to 6 hours at 77#176F, 50% R.H. AWLGRIP#174
  • Topcoats with a full add of PRO-CURE#174 X-1
  • VOC: 73015 - 951 g/lt or 7.9 lbs/gal 73014 - 888 g/lt or 7.4 lbs/gal

 

Application Equipment - This product is an additive component component. See instructions for the primary product application.

Surface Preparation - Additive component. Refer to the primary product application.

Mixing and Reduction - Pro Cure X-138 73015. 1 liquid ounce per 2 gallons of mixed topcoat color base and coverter. This is the maximum amount; lesser quantities may be sufficient. This is equivalent to 6 capfuls if measured using the screw top cap.

Application Instructions - Pro Cure X-138 may be used in both spray and brush applications. Recoatability: Awlgrip Topcoats with a full add of Pro-Cure X-138 may be recoated or taped in 6 to 8 hrs at 77 F/50% RH. Do not apply to surfaces warmer than 105 F or colder than 55 F, or attempt to cure at temperatures below 55 F.

Note: Accelerators are not recommended above 85 F. Doing otherwise could impair performance.

X-138: 1 liquid ounce per 2 gallons of catalyzed topcoat adding reducer.

Temp (F)  Reducer  Pro-Cure Accelerator  Dry Time (Hrs)  Application Life (Hrs) 
100  T0005, T0002  None  18-20  6-8 
90  T0001  X-138/X-98  3-4/1-2  2-3/1-2 
80  T0003  X-138/X-98  4-5/2-3  4-5/1-2 
70  T0003  X-138/X-98  11-12/4-5  6-7/2-3 
60  T0001  X-138/X-98  12+/6-7  6-7/3-4 
BRAND: Awlgrip
Number Of Parts: One Part
Type: Accelerators
Users Also Bought:
JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog