We are committed to delivering
the perfect order - on time and hassle free.
Fast and reliable -- Jamestown Distributors will ship anywhere in the world.
New low VOC formulation of the popular Sikaflex 292 adhesive. 292i/801 all purpose Elastic Adhesive often used for bonding of floors to subfloors or metallic frame, exterior interior panels, bonding trim moldings to hull. Sika 292 is a one-component, thixotropic, high modulus, structural, polyurethane-based adhesive system. The product is used for a wide range of bonding applications, deck-to-hull bonding and bedding of chainplates, through-hull fittings and toe rails. A high viscous, high strength adhesive, Sikaflex 292 can replace rivets, screws, welds and other mechanical fasteners in building and repairing boats of all types. This remarkable product is designed for use on a wide variety of marine substrates. It seals and bonds in one step.
$23.82
The item was added to your wishlist.
The item was added to your shop cart.
Technical Specifications
Density
- 9.7 lbs per gal
Cure System
- Moisture Curing
Tack Free Time
- 30-45 minutes
Rate of Cure
- 24 hours
Shore A Hardness (ASTM D2240)
- 45-50
Elongation at Break (ASTM D412)
- 300 percent
Tensile Strength (ASTM D412)
- 550 PSI
Lap Shear Strength (ASTM D1002)
- 350 PSI
Application Temperature
- 40F to 110 F
Color
- White
Shelf Life
: 9 months
Sandable, paintable and is waterproof
Below Water Line (yes/no):
No
BRAND:
Sika
Material:
Polyurethane
Rate Of Cure:
Fast
Strength:
Strong
Type:
Adhesive
Usage:
Bonding
Questions & Answers about Sikaflex 292i/801:
2011-12-06BUD MACEY asked: What Sikaflex product should I use to bed and seal a cutlass bearing holder that is bolted to the stern tube and will need to be removed periodically to eventually replace worn cutlass bearing. I am talking about the holder being sealed to the stern tube, not sealing the cutlass bearing into the bearing holder.?
Thanks
+Expand Answers
2011-12-06BRUCE DECKER: I wish I could help but I don't have any experience using Sikaflex in an underwater application. I used it to bed some step plates to a cap rail and it has held up so far. I needed a product that would fill gaps and prevent "wobbling" of the step plate since the cap rail had a slight bevel to it. I know products like 3M5200 are ok below the waterline but are a bear to remove down the road. I would look for a product that first and foremost is approved for below water line applications.
the four wiring harness mounts had come loose from the underside of the deck. I used the 292 to re-bond them to the underside of the deck. It was easy to do and so far has held. I will know for sure by the end of next year. It is a heavy wiring harness.
5/24/2009
5.0
VERY HAPPY!!!
By Mud Bug
from Owensboro, KY
About Me Recreational
Pros
Easy to Use
Weather Proof
Cons
Best Uses
Outdoor
Comments about Sikaflex 292:
I had a small leak coming from the chamber that breaches the hull, but could not pin point it. the leak would cause the automatic bilge to turn on two or three times during the day depending on how hard we played. I used this product to seal the seams of the chamber, and it worked great! we just got back from the lake from a very hard day of having fun, and the hull was dry!!!!
Price Match Promise:
If you find a lower delivered price on a new identical item in stock and available for purchase from an authorized U.S. merchant.
- email us at pricematch@jamestowndistributors.com. This offer does not include special coupons or other promotional offers.
Special order items are not stocked and are ordered direct from the manufacturer. They are non-returnable, may take 2-4 weeks, price and shipping charges subject to change.
Checkout: 
Item(s) in your cart:
The item was added to your wishlist.
