3M Scotch-Weld DP8005 Acrylic Adhesive 45 ml
3M 3M Logo
  • 3M Scotch-Weld DP8005 Acrylic Adhesive 45 ml

3M Scotch-Weld DP8005 Acrylic Adhesive

3M Scotch-Weld DP8005 Acrylic Adhesive is a two-part structural formulation (10:1 mix ratio by volume) that bonds Low Surface Energy plastics (like polyethylene or polypropylene) together or with other materials without surface pretreatment.

3M's high-strength Scotch-Weld Structural Adhesives are fundamentally load-bearing formulations. Bond strength is often as strong as, or stronger than the materials joined.

Available in Off-White only.

 
IN STOCK - Available for pickup  
$48.24 / ea
qty.   
$48.24
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

The 3M Scotch-Weld EPX Plus II 10:1 Mixing Nozzle simultaneously meters, mixes, and dispenses the 3M Scotch-Weld DP8005 and DP8010 Plastic Adhesives. The 10:1 Ratio Nozzles are sold separately, and individually. (Item No. 3M-051115-69043; orange square mixing nozzle).

The 3M Scotch-Weld EPX Plus II 10:1 Plunger is required to properly dispense the 3M Scotch-Weld DP8005 and DP8010 Plastic Adhesives. The 10:1 Ratio Plunger is sold separately. (Item No. 3M-051115-69044)

The 3M Scotch-Weld EPX Plus II Applicator applies two-part adhesives with a squeeze of the trigger. The EPX Plus II Applicator is used to Dispense 3M Scotch-Weld Adhesives in Duo-Pak Cartridges. The EPX Plus II Applicator works with the 45 ml adhesive, and is sold separately. (Item No. 3M-50004)

The 3M Scotch-Weld EPX Plus II Applicator is supplied with (1) 1:1 Ratio Plunger and (1) 2:1 Ratio Plunger.

Item Number  Compatible Mixing Nozzle Item Number  Compatible Plunger Item Number 
MMM-051128-99349 45ml off-white adhesive  MMM-051115-69043: EPX Plus II Mixing Nozzle Orange Square for DP8005 and DP8010 (sold separately)  MMM-051115-69044: EPX Plus II 10:1 Plunger -- 45 ml size (sold separately) 
Below Water Line (yes/no): No
BRAND: 3M
Material: Methacrylate
Number Of Parts: Two Part
Rate Of Cure: Fast
Strength: Strong
Type: Structural Adhesive
Usage: Bonding
4 7

REVIEW SNAPSHOT®

by PowerReviews
3M Scotch-Weld DP8005 Acrylic Adhesive
 
4.0

(based on 7 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (3)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

83%

of respondents would recommend this to a friend.

Pros

  • Easy to use (5)

Cons

No Cons

Best Uses

No Best Uses
    • Reviewer Profile:
    • Advanced (3)
    • Was this a gift?:
    • No (4)

Reviewed by 7 customers

Displaying reviews 1-7

Back to top

 
5.0

worked great

By fred

from Alabama

About Me Beginner

See all my reviews

Verified Buyer

Pros

  • Easy to Use

Cons

    Best Uses

      Comments about 3M Scotch-Weld DP8005 Acrylic Adhesive:

      Have never found anything over the counter to glue the two most common Poly plastics together until now. This stuff is the real deal.

      • Was this a gift?:
      • No

      (1 of 1 customers found this review helpful)

       
      5.0

      Fixed my Coleman boat

      By RHarper

      from Roanoke VA

      About Me Advanced

      Comments about 3M Scotch-Weld DP8005 Acrylic Adhesive:

      After trying numerous repairs to my Coleman Crawdad (boat) that I used to float the river, even those recommeded by the manufactuer, I ran across this product. Five years later I still don't have a leak even though the boat's bottom is constantly flexing while in use. I did bolt in a small brace across the cracked area before applying the product on the brace and the crack. I have repurchesed the product since for other problem areas.

      • Was this a gift?:
      • No

      (0 of 1 customers found this review helpful)

       
      4.0

      Best glue I've found for HDPE

      By Jim

      from San Jose, CA

      About Me Advanced

      Verified Reviewer

      Pros

      • Easy to Use

      Cons

        Best Uses

          Comments about 3M Scotch-Weld DP8005 Acrylic Adhesive:

          Best adhesive I've found to adhere a polypropylene encapsulated capacitive sensor to a high density polyethylene bottle. All others tried have failed.

          • Was this a gift?:
          • No

          (2 of 2 customers found this review helpful)

           
          4.0

          So far, so good

          By Jim the Chemist

          from Cedar Rapids, IA

          About Me Professional

          Pros

          • Easy to Use

          Cons

            Best Uses

              Comments about 3M Scotch-Weld DP8005 Acrylic Adhesive:

              Used this adhesive to combine two disks of polypropylene together. The adhesive has been exposed to boling water many times and then cooled repeatedly. So far, so good. Only time will tell if the product will hold up.

              • Was this a gift?:
              • No

              (5 of 5 customers found this review helpful)

               
              4.0

              Storage of partially used container

              By kbaybob

              from Kaneohe, HI

              About Me Advanced

              Verified Reviewer

              Pros

              • Easy to Use

              Cons

                Best Uses

                  Comments about 3M Scotch-Weld DP8005 Acrylic Adhesive:

                  Rather than replacing the cap to save unused material, it is probably better to just leave the applicator mixing nozzle in place and let the material harden in the nozzle and seal itself. A tiny bit of activator contacting the other part at the opening of the tubes will harden and make it impossible to get the rest of the material out in the future. For long term storage, refrigeration will extend the shelf life. One source at 3M said freezing was OK, but another who seemed more knowledgeable said that refrigeration is good but freezing will damage the catalyst.

                  (2 of 2 customers found this review helpful)

                   
                  5.0

                  Did the job for me

                  By jb

                  from Goldsboro, NC

                  About Me Casual/ Recreational

                  Pros

                  • Easy to Use

                  Cons

                  • expensive

                  Best Uses

                  • Repair polyethelene tank

                  Comments about 3M Scotch-Weld DP8005 Acrylic Adhesive:

                  used to repair hydraulic reservoir (uses Mobil 1 synthetic engine oil). Had tried many other products to no avail. Worked good for me.

                  (0 of 9 customers found this review helpful)

                   
                  1.0

                  Did not work

                  By uncle Al

                  from Eureka, CA

                  About Me Recreational

                  Pros

                    Cons

                    • Difficult to Use
                    • Ineffective

                    Best Uses

                      Comments about 3M Scotch-Weld DP8005 Acrylic Adhesive:

                      I was told by the boat manufacturer this would seal a small leak......it did not.

                      Displaying reviews 1-7

                      Back to top

                      Related Items:
                      JD on Facebook Live Tech Support Jamestown Forum Free Catalog