TotalTread Non Skid Deck Paint
Evercoat Marine Skid No More ground rubber latex traction nonskid paint
Evercoat Evercoat
  • Evercoat Marine Skid No More ground rubber latex traction nonskid paint

Evercoat Skid-No-More

Skid-No-More is an acrylic latex coating containing ground rubber for traction. Soft, resilient non-skid properties are non-abrasive. Works with wood, fiberglass, metal, concrete and previously primed surfaces. Also works on industrial surface areas including floors. No priming of roughened clean surfaces necessary. Can be color tinted with Evercoat coloring agents. Applies like a latex paint. 2 coats are recommended for a finished, carpet-like look. Approximately 50 - 60 sq ft / gal.
IN STOCK - Not available for pickup  
$27.14 / qt
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Use Skid-No-More on steps, porches, walkways, diving boards, docks, boat decks and tools. Skid-No-More is a textured non-skid coating, formulated with acrylic latex and ground rubber. It is non-abrasive, pliable and resilient to the touch. It can be applied to most surfaces with a paintbrush, thin napped roller or squeegee. Skid-No-More comes in a medium gray color, but can be tinted to a desired color with Evercoat Color Agents.

Below Water Line (yes/no): No
BRAND: Evercoat
Material: Acrylic
Number Of Parts: One Part
Rate Of Cure: 1 Day
Type: Anti-Slip Covering
3 4


by PowerReviews
Evercoat Skid-No-More

(based on 4 reviews)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars




of respondents would recommend this to a friend.

Reviewed by 4 customers

Sort by

Displaying reviews 1-4

Back to top

(1 of 2 customers found this review helpful)


Worked Perfectly

By Cotton

from Dallas, Texas

About Me Avid Do-It-Yourselfer


  • Easy To Clean
  • Ergonomic Grip


    Best Uses

    • Detailed Work
    • Large Areas
    • Small Areas

    Comments about Evercoat Skid-No-More:

    New floor in my center console looks great and is sealed and slip proof

    (2 of 2 customers found this review helpful)


    Will not buy this product again

    By Lolo

    from Mexico

    Comments about Evercoat Skid-No-More:

    We just painted our sail boat/home from top to bottom, something that has been needed for some time. Non skid was one item on the list. We have a lot of non skid area on the deck and many things to paint around. We opened the can and the gray color was perfect, and after mixing it the texture was very nice. However, after applying it to our deck it became blotchy with rubber bits sticking up and BLACK. Not the color in the can, nor the texture I saw in the can. Where did the gray color go? Now I have a black deck that will make the inside of the boat very hot. There isn't any information that tells you the end result. When I Bought it the dealer didn't tell us it dried black. It is so horrible it makes me sick to look at my boat. I wasted my money and time on this product. It is best for a work boat or a fishing boat, but not my home.

    (4 of 7 customers found this review helpful)


    good stuff

    By Will, do it better than most

    from Tafton PA

    About Me Casual Do-It-Yourselfer


    • Easy To Clean


      Best Uses

        Comments about Evercoat Skid-No-More:

        after a good cleaning and surface scuffing.this paint product worked great.just need to keep in mind one coat will not do it.plan on doubling the square footage for proper coverage.the job
        came out better than imagined.

        (9 of 11 customers found this review helpful)


        Not quite there...

        By Billy the Kid

        from New England

        About Me Professional


        • Easy to apply


        • Deteriorates
        • Not Gasoline Friendly

        Best Uses

          Comments about Evercoat Skid-No-More:

          This Product is easy to apply and as used on the deck of a commercial skiff worked well up until there was a small gasoline spill... the gas bubbled this stuff off and made a mess of the surrounding area, similar to peeling latex paint on a wall. All well and good after a cleaning and reapplication... two months later an oil rag fell on deck and same thing, bubbles and failure of the nonskid. Two thumbs down. Might work well on a pool diving board but definitely not where it may encounter petroleum.

          Displaying reviews 1-4

          Back to top

          Related Items:
          JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog