1/4" Hex Shank
Item No.

Point Size

Screw Size

Style

QTI250R0

0

4

Insert

QTI250R1PK

1

6

Insert

QTI250R2PK

2

810

Insert

QTI250R3

3

1214

Insert

QTI801R

1

6

Power Shank

QTI802R

2

810

Power Shank

QTI803R

3

1214

Power Shank

Driver:

Square Drive 
Type:

Bits and Countersinks 
 Questions & Answers about Square Recess Driver Bits:
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank
 20120505 VIC PETRAS asked:
is there such a bit called a 8 point torx
I have a trailer with screws like this.
a #2 squre drive strips every 1 out of 4 removed?  +Expand Answers
 20120508 MARCY CELLA:
Doing research on the internet with this question this is the answer I found. Most likely you need an S2 bit. Its a square bit. The 8 points you see is really two squares. (So I guess there are no 8 point bits)
You might want to type in "Is there a torx bit that has 8 points" to have other answers hope this helps.
M  20120508 LYLE BOGART:
I'm pretty sure that torx bits are 6 point only. Is your #2 square bit still square or have the edges rounded? Good luck!  20120508 PATRICK BAJTKA:
Go online and do a search (I used google) for an "8 point star bit"
Lots of sources pop up so in answer to your question, YES there is such a thing but you may have to work a little to find one.  20120509 ROY HOWES:
Yes torques bits.
They come in different sizes like 10,15, 20,25
Square bits are for square drive screws.
Hey come in sizes like 1, 2, 3
You need the right tool for the job.
 20110906 VINCENT CALLAGHAN asked:
what is correct driver for your FSSDSFST7X15/8 SQ DR DECK SCR S/S 7 X 15/8 TRIM screw?  +Expand Answers
 20110915 TOM CASTELLI WESLEYAN UNIVERSITY:
#2 square drive. Not all bit are the same, some fit better than others.  20110915 PATRICK BAJTKA:
A regular 1/4 inch socket fits perfectly.  20110916 CAROLYN LINKOUS:
we use the following driver
QTI802QTI802R  #2 x 115/16 in.  Power Shank

5
1
1/29/2013 5.0Quality = dependable reliability By Ken from RI About Me Avid DoItYourselfer  Home Repair
 In The Workshop

