Interlux Interior Finish 750
Interlux Interlux paint
  • Interlux Interior Finish 750

Interlux Interior Finish 750

Interlux Interior Finish 750 is specially formulated for use throughout the interiors of all types of construction. Both high in gloss and opacity, Interlux 750's tough and durable finish provides excellent chemical resistance and is easy to clean.

When used in combination with Interior Primer 860, it holds a Surface Spread of Flame Certification. Similar to Interlux 860, 750 reduces surface preparation requirements and provides fast walk-on times for more efficient and economical applications.

Interior Primer 860 is approved for use on all suitably prepared substrates and epoxy primers. It should NOT be used over any one pack product. It can also be applied to properly prepared powder-coated substrates and pipework after consultation with an Interlux Technical Representative.

Available in White and Gray.

 
IN STOCK - Available for pickup  
$162.26 / gl
qty.   
$162.26
$31.95
$181.94
$181.94
$181.52
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Application and Use

STEEL: Degrease the surface with Thinner 910. Gritblast to SSPC-SP10/NACE 2 (Sa 2.5) near white metal surface. If gritblasting is not possible, grind the metal surface with 24-36 grit adhesive discs to achieve a uniform, clean, bright metal surface with 2-3 mils anchor pattern to an SSPC-SP-3 / St3 standard. Use an angle grinder on smaller areas. Prime with Interior Primer 860.

STEEL with a Shop Primer: Degrease the surface with Thinner 910. Clean the surface with contaminant-free rags and ensure rust, dust, oil, grease, and dirt are removed. NOTE: Shop primer should have been applied onto a substrate whre standard profile requirements have been achieved. Prime with Interior Primer 860.

ALUMINUM: For dry areas: degrease the surface with Thinner 910. For wet areas: degrease the surface with Thinner 910 and scrub well using a maroon, 3M Scotch-Brite™ (7447) pad. Prime with Interior Primer 860.

STAINLESS STEEL: Degrease the surface with Thinner 910. Light gritblast to produce a profile of 2 mils. Prime with interior primer 860.

LAMINATE: Closed and sound condition laminate only. Note: fibers are impregnated with resin, no fibers exposed. Degrease the surface with Tinner 910. Scrub well using a maorron, 3M Scotch-Brite™ (7447) pad. Prime with Interior Primer 860.

GELCOAT: Prime with Interior Primer 860. Degrease surface with Fiberglass Solvent Wash 202 using the two-cloth method. Sand with 80 grit paper. Ensure sanding debris is removed by wiping down with 202 Fiberglass Solvent Wash prior to proceeding. Prime with Interior Primer 860.

POWER COATED SURFACES: Degrease the surface with Thinner 910. Scrub well using a maroon, 3M Scotch-Brite™ (7447) pad. Prime with Interior Primer 860.

Below Water Line (yes/no): No
BRAND: Interlux
Material: Epoxy
Number Of Parts: Two Part
Type: Epoxy Paint
Related Items:
JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog