Raymarine SmartPilot X-5 Sport Pilot System

The Raymarine SmartPilot X-5 Sport Pilot System is complete with everything needed for installation on sport cruisers, rigid inflatables and smaller sport fishing boats. The large ST6002 display provides system information while also acting as a multi-function instrument or navaid repeater.RAY-E12206-SP X-5 Sport Pilot System

The SPX-5 Sport Wheel Pilot is designed for manual cable steered boats with laden displacements of up to 2000 kg(4400 lbs) and manual hydraulic and servo hydraulic steering up to 3500 kg(7700 lbs).

This item is no longer available.

The item was added to your wishlist.

The item was added to your shop cart.

SmartPilot X-5 Sport Pilot Wheel System General Features Include:
Easy-to-install autopilot for power boats typically up to 30ft (9m)
Built-in rate gyro sensor with Raymarine AST (Advanced Steering Technology) gives superb steering performance and boat handling.
AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditions
Smart Rudder Sense&trade technology eliminates the need for a rudder reference sensor
SeaTalk®, SeaTalkng, NMEA2000 and NMEA0183 compatible
Modular system includes: ST6002 Autopilot Controller; SmartPilot X-5 course computer; Rugged, cockpit mounted drive unit; Fluxgate compass
System can be expanded with multiple autopilot controls and wireless hand held remote controls
Suitable for fixed and tilt steering systems
Auto Speed Gain adjusts the amount of helm applied at different boat speeds for a smooth, safe ride.
Course Memory: After a manual course change to avoid an obstruction, simply press Auto for one second to return to your previous course.

SmartPilot X-5 Sport Pilot Wheel Specifications	-
X-5 Course Computer Specifications	-
Nominal voltage (volts DC)	12v systems
Absolute voltage range (volts DC)	11 - 16 volts
Overall dimensions (LxWxD)	237 x 170 x 55 mm (9.6 x 6.7 x 2.2 in)
Course computer weight kg (lbs)	0.55 kg (1.2 lb)
Mounting methods	bulkhead
NMEA input connections (0183)	1
NMEA output connections (0183)	1
SeaTalk connections	2
SeaTalkng connections	1
Approvals	EMC, FCC, IC and CE marked
Operating temperature range	-10° C to +55° C
Non-operating temperature range	-20° C to +70° C
Waterproofing standard	drip resistant
Humidity Limit	up to 80%
Sport Drive Specifications	-
Nominal voltage (volts DC)	12v systems
Absolute voltage range (volts DC)	10 - 16 volts
Operating temperature range	-10° C to +50° C
Non-operating temperature range	-20° C to +70° C
Humidity	up to 95%
Waterproofing standard	waterproof to IPX6
ST6002 Control Head Specifications	-
Connections	SeaTalk, NMEA 0183
Control Unit dimensions	width: 110 mm (4.33 in)height: 115 mm (4.53 in)depth: 41 mm (1.62 in)
Environmental	waterproof to CFR46
Interfaces	Eight button illuminated keypad
Keypad	Eight button illuminated keypad
Liquid Crystal Display (LCD)	Displays heading, locked course and navigational data, data pages. Three brightness levels + off
Operating temperature	Control Unit: 0° C to +70° C (32° F to 158° F) Drive unit: 0° C to +60° C (32° F to 140° F)

The right Tiller pilot, correctly installed, will give you years of dependable service and will quickly become a valued member of the crew. Start by selecting the correct pilot for your needs.

Remember, always use fully laden displacement which is often 20% above the designed displacement, and don't be tempted to choose a pilot which is always working at the limits of its designed capabilities. If you choose your pilot with safety in mind, then it won't struggle when the going gets tough.