Electronics >

Autopilots

Raymarine ST7002 Plus Autopilot Control Heads

How to's

Autopilots Buyers Guide

More Info

Raymarine Autopilot Brochure
Raymarine ST7002 Operating Guide
Raymarine ST7002 Quick Start Guide
Raymarine Installation Guide for Surface Mount Controllers ST6002, ST7002, ST8002>
NOTE: Before cutting any holes with these templates, please double check the printed measurements on the template against the physical size of the product to be installed. Some printers will scale these templates to fit the available paper size, resulting in a template that is either too small or too large.
Raymarine Installation Guide for Flush Mount Controllers ST6002, ST7002, ST8002>
NOTE: Before cutting any holes with these templates, please double check the printed measurements on the template against the physical size of the product to be installed. Some printers will scale these templates to fit the available paper size, resulting in a template that is either too small or too large.

Raymarine ST7002 Plus Autopilot Control Heads

The Raymarine ST7002 Plus Autopilot Control Heads feature a simple to use intuitive 13 pushbutton keypad. The large 4" LCD display is easy to read and makes the 15 pages of instrument or navigation data easy to access.

The ST7002 Autopilot Controller is fully waterproof (CFR46) and is available in surface mounted or flush mounted versions, matching the profile of ST60 Plus instruments, as well as Raymarine Multifunction Displays and marine monitors.

Multiple ST7002 units can be used in a system with the appropriate SeaTalk cables and connectors.

This item is no longer available.

The item was added to your wishlist.

The item was added to your shop cart.

ST7002 Plus Control Head Features:
Large 4" crisp LCD display with easy-to-read rudder angle indicator
New industrial design that cosmetically matches ST60 Plus instruments, C-Series and E-Series
Simple setup and calibration with AutoLearn when used with G series corepacks
A versatile data repeater with 15 configurable instrument/navigation data pages
Remote ST60 instrument control feature allows control of ST60 instrument displays from the ST7002 keypad
Programmable AutoTack control
Intuitive keypad and the proven Autohelm button control
Compatible with all SmartPilot corepacks and drive units
Dedicated controls for response, resume and set course

ST7002 Plus Specifications	-
Nominal supply voltage:	12 V DC via SeaTalk
Operating voltage range:	10 V to 15 V DC
Current consumption (in Standby mode)	50 mA (less than 120 mA with full lighting)
Operating temperature:	0° C to +70° C (32° F to 158° F)
Water protection:	waterproof to CFR46
Overall dimensions: width x height x depth	175 mm (6.9 in) x 115 mm (4.53 in) x 41 mm (1.62 in)
Keypad:	13 button illuminated keypad
Liquid Crystal Display (LCD):	shows heading, locked course and navigational data, and up to 15 data pages
LCD illumination:	3 brightness levels + off; 15 contrast levels
Input connections:	SeaTalk (x2) and NMEA 0183
Output connections:	SeaTalk (x2)
CE approvals:	conforms to: 89/336/EC (EMC), EN60945:1997