Minn Kota Pontoon Freshwater Bow Mount Motors

Minn-Kota Pontoon freshwater hand control motors feature a Tilt Twist Tiller that has a natural ergonomic grip to deliver positive hands-on control for speed and steering.

The Minn-Kota Pontoon motors have a compact bow mount that frees up more deck space. The mount is compatible with our Quick Release Brackets and uses a Latch & Door Design for easy depth adjustment and motor removal.

All Pontoon freshwater motors feature an indestructible composite shaft that is stronger than steel. It flexes on impact and won't break, kink or corrode.

All Minn Kota motors offer extra large windings and commutators that dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. Minn Kota motors have a unique bearing system that reduces friction to cut fish-spooking noise.

1 ea and more

$399.99 / ea

qty.

The item was added to your wishlist.

The item was added to your shop cart.

Pontoon Models	55/H	70/H
Item No.	MIN-1355954	MIN-1355975
Max Thrust #	55	70
Volts	12	24
Shaft Length	52"	52"
Mount	Pontoon Latch & Door	Pontoon Latch & Door
Control	Tilt/Twist Tiller	Tilt/Twist Tiller
Speeds	5/Multiple	5/Multiple

Choosing the correct shaft length is important so that the angler's electric motor does not cavitate, creating fish-spooking noise. The rule of thumb is that the center of the motor section should be submerged 9".

In general, shaft length selection is more critical with bow-mount motors versus transom-mount motors. Most boat transoms are similar in their distance to the water, and Minn Kota's standard transom shaft lengths should be adequate.

With bow-mounted motors, there is much greater variation in shaft length requirements. Measure down from the mounting surface of the transom or bow to the water level. Add 5" to waterline measurement for fishing in rough water. Add 12" to waterline measurement for steering a hand control motor while standing. Use this measurement and the tables above to find the appropriate shaft length.