We are committed to delivering
the perfect order - on time and hassle free.
Fast and reliable -- Jamestown Distributors will ship anywhere in the world.
Moeller Drain Tubes are designed to allow water and fluids to flow out. Use a bailer plug to fill the tube when draining is not desired and to prevent water from coming in. These drain tubes are brass and aluminum making them corrosion resistant and have a 90-degree flange.
$3.74
$4.08
$4.08
$5.33
$6.77
$9.46
$8.16
$8.16
$11.20
$15.08
$18.60
$9.24
$12.99
$15.36
$9.24
$12.68
The item was added to your wishlist.
The item was added to your shop cart.
BRAND:
Moeller
Metal:
Brass
Type:
Drain Plugs and Tubes
Questions & Answers about Moeller Drain Tubes:
2012-03-14JAUNITA KERR asked: does the 2 peaces screw togather to form 1 drain?
+Expand Answers
2012-03-14STEWART SAUNDERS: No, it has flared end as in the picture, and then you cut it to the length you need.
2012-03-14Jaunita Kerr: thanks vrry much a big help
2012-03-14STEWART SAUNDERS: glad to be of help! take care.
2012-03-14ROBERT DARBY: You might have found a million dollar idea! That would be great if they did but they do not. Once you get the drain tube that fits your opening you need to get a special tool that gets inserted through the tube and bends the unflared edge around the other side of the opening. The tool is bassically a bolt that goes through the tube with two flared ends. Once tightened the tube will be crimped into place. caulk should be applied inside the opening before the tube is inserted and crimped.
Hope that helps
Rob
2012-03-14Jaunita Kerr: thanks i have no tool
2012-03-14GREG SETTER: No, they do not. They are set in place with sealant and then the straight end needs to be flared once installed. You would need to get these a little bit longer than the distance you need to go with it and then use a flaring tool to seal it against the other side of wherever it is going to.
2011-09-26PAUL GEORGOPULOS asked: do you have small bailer plugs ? less than 1/2 in. dia
+Expand Answers
2011-09-27RICHARD F. KULAS: Paul,
I installed the 1" tube in a 17 Montauk and used the Jamestown flqaring tool which worked well. If you need small rubber expansion plugs and they can't be found at Jamestown, try a pool supply or plumbing supply
house. Pretty common item. rich
2011-09-29WILLIAM LEIPERT: No. Anything smaller than 1/2" would be near useless as a drain, to easy to clog.
This is a great OE or replacement drain tube piece. Comes with one end flanged and once installed the other end can be easily flanged with a flanging tool. High quality and well made piece!
11/2/2012
5.0
Drain Tubes Work Well
By John
from Melbourne, FL
About Me Avid Do-It-Yourselfer
Pros
Good Value
Cons
Best Uses
Sailboat Transom Drain
Comments about Moeller Drain Tubes:
The tubes are great and good value. The tool to put them in right is expensive, relative to the cost of the tubes. Think of it this way, though. For <$50 I have two very nice transom drain tubes in my sailboat now. I'm happy.
12/5/2010
(1 of 1 customers found this review helpful)
5.0
Very good quality brass tubes
By Flamingo Kid
from Lake Ozark, MO
About Me Casual Do-It-Yourselfer
Pros
No Splits when flanged
Quality Brass
Cons
Best Uses
Comments about Moeller Drain Tubes:
You will need a Flanging tool in order to install the tube.
The flanging tool instructions which came with the tool and the instructions on this site are misleading and incomplete so I would suggest searching the internet forums for worthwhile help.
3/25/2008
(2 of 4 customers found this review helpful)
5.0
Quality at the right price
By B Whaler Prodject
from Salem Ma
Pros
Durable
Good Value
High Quality
Cons
Best Uses
Works great for my whaler
Comments about Moeller Drain Tubes:
Great quality at a reasonable price. Perfect replacement for my whaler.
Price Match Promise:
If you find a lower delivered price on a new identical item in stock and available for purchase from an authorized U.S. merchant.
- email us at pricematch@jamestowndistributors.com. This offer does not include special coupons or other promotional offers.
Special order items are not stocked and are ordered direct from the manufacturer. They are non-returnable, may take 2-4 weeks, price and shipping charges subject to change.