Pettit Trinidad Antifouling Bottom Paint
Pettit Z-Spar Pettit Z-Spar
  • Pettit Trinidad Antifouling Bottom Paint

Pettit Trinidad Antifouling Bottom Paint

Pettit Trinidad is the strongest antifouling boat bottom paint available, containing the highest percentage of cuprous oxide (up to 75 percent) to aggressively combat marine growth in even the most torrid, tropical conditions.

Trinidad is designed for minimum hull maintenance. This hard epoxy base bottom paint produces the most durable finish for long lasting performance. Left in the water, Trinidad provides classic, year round service. Trinidad has excellent adhesion to fiberglass, wood and steel hulls and is perfect for both power and sail boats. Its compatibility with all properly prepared hard bottom paints permits safe overcoating without fear of lifting.

Trinidad Red  
IN STOCK - Available for pickup  
$89.99 / qt
qty.   
$89.99
$89.99
$234.99
$89.99
$89.99
$234.99
$89.99
$89.99
$234.99
$89.99
$89.99
$234.99
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
    Technical Specifications
  • VEHICLE TYPE: Modified Epoxy/Rosin
  • FINISH: Flat
  • COLORS: Blue, Green, Brown, Red, Black
  • COMPONENTS: 1
  • CURING MECHANISM: Solvent Release
  • SOLIDS (theoretical)
    By weight:
    86 +- 2 percent
    By volume: 56 +- 2 percent
  • COVERAGE: 400 sq. ft/gal.
  • VOC: 400 g/l max.
  • ACTIVE INGREDIENT: Cuprous Oxide
    Red, Brown:
    75.8 percent
    Blue, Green: 65 percent
    Black: 60-65%

    APPLICATION DATA

  • METHOD: Brush, Roller, Airless or Conventional Spray
  • NUMBER OF COATS: 2
  • DRY FILM THICKNESS PER COAT: 2 mils
  • WET FILM THICKNESS PER COAT: 3.6 mils
  • APPLICATION TEMP: 40Deg F. Minimum 90Deg F. Max.

APPLICATION INFORMATION

Trinidad is heavily loaded with cuprous oxide. As a result of this there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible shake the can of paint on a mechanical paint shaker. Before using check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly.
Adhere to all application instructions, precautions, conditions and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. Do not thin Trinidad more than 10 percent (12 ounces per gallon) or inadequate paint film thickness will occur and premature erosion of the finish will be likely.

SURFACE PREPARATION Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance.

MAINTENANCE
No antifouling paint can be effective under all conditions of exposure. Man made pollution and natural occurrences can adversely affect antifouling paint performance. Extreme hot and cold water temperatures, silt, dirt, oil, brackish water and even electrolysis can ruin an antifouling paint. Therefore, we strongly suggest that the bottom of the boat be checked several times a month to make sure it is clean and that no growth is occurring. Lightly scrub the bottom with a soft brush to remove anything from the antifouling paint surface. Scrubbing is particularly important with boats that are idle for extended periods of time. The coating is most effective when the boat is used periodically.

SYSTEMS
Mix paint thoroughly to insure toxicants are evenly dispersed throughout the can. All surfaces must be clean, dry and properly prepared prior to painting. Do not apply Trinidad on aluminum.


Previously Painted Surfaces:
If the previous coating is in good condition, thoroughly sand with 80 grit paper then solvent clean with 120 Brushing Thinner to remove residue. Apply two finish coats of Trinidad. If the previous coating is soft or in poor condition, remove to the bare surface by sanding or using Pettit 9050 Bottom Paint Remover. Proceed with appropriate bare system as described below. Old tin copolymers should be removed or sealed with Pettit 6627 Tie Coat Primer before applying Trinidad.

Bare Fiberglass: All bare fiberglass, regardless of age, should be thoroughly cleaned several times with Pettit 95 Fiberglass Dewaxer or 120 Brushing Thinner. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 95 Fiberglass Dewaxer or 120 Brushing Thinner to remove sanding residue. Then apply two coats of Trinidad, following application instructions. Careful observation of the above instructions will help ensure long term adhesion of this and subsequent years' antifouling paint.
To eliminate the sanding operation, wash the fiberglass three times using Pettit 95 Dewaxer only. Then apply one coat of Pettit 6999 Sandless Primer. Consult the Sandless Primer label for complete application and antifouling topcoating instructions.

Bare Wood: Sand entire surface with 80 grit paper; wash clean with 120 Brushing Thinner. Apply a coat of Trinidad thinned 25 percent with 120 Brushing Thinner, allow an overnight dry, lightly sand and wipe clean. Apply two finish coats of Trinidad.

Bare Steel: Sandblast or disc sand to a clean, bright finish remove residue. Then either immediately apply two coats of 6980 Rustlok Steel Primer, allowing each to dry only 1-2 hours prior to overcoating - OR - immediately apply one thin coat of 6455 Metal Primer and allow to dry two hours; follow with two coats of 6462 Q.D. Zinc Chromate Primer, allowing each to dry two hours minimum. Apply two finish coats of Trinidad.

Keels - Lead: Abrade surface to bright metal; clean off residue. Apply one thin coat of 6455/044 Metal Primer; allow to dry two hours. Apply one coat of Pettit 6627 Tie Coat Primer then, if fairing is required, apply Pettit Protect 7000/7001 Epoxy Fairing Compound. Follow with an additional coat of 6627 Tie Coat Primer per label directions. Apply two finish coats of Trinidad.

Keels - Steel or Cast Iron: Abrade surface to bright metal; clean off residue. Apply one coat of 6980 Rustlok Steel Primer, allowing to dry only 1 - 2 hours prior to overcoating. Then, if fairing is required, apply 7000/70001 Epoxy Fairing Compound followed by one coat of Pettit 6627 Tie Coat Primer, finish with two finish coats of Trinidad.
This is a simplified system for smaller areas designed for good performance and easy application by the boatyard professional or do-it-yourselfer. For larger vessels or for applications where a high performance, professional system is desired, please consult your local Pettit representative or the Pettit Technical Department.

 

  • Highest Percent of Cuprous Oxide for maximum long-term protection
  • Excellent performance in even the most torrid, tropical fouling conditions
  • The standard by which all other anti-fouling paints are judged

 

DRY TIME AT TEMPERATURE (Hours)  To Recoat   To Launch 
90 Deg F  
70 Deg F   16 
40 Deg F   24 
BRAND: Pettit Z-Spar
Number Of Parts: One Part
Type: Copper AF Paint
3.7 3

REVIEW SNAPSHOT®

by PowerReviews
Pettit Z-SparPettit Trinidad Antifouling Bottom Paint
 
3.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

67%

of respondents would recommend this to a friend.

Reviewed by 3 customers

Sort by

Displaying reviews 1-3

Back to top

 
5.0

GREAT!

By Gringo

from Annapolis, MD

About Me Professional

Pros

  • Even Paint Distribution

Cons

    Best Uses

    • Large Areas

    Comments about Pettit Z-Spar Pettit Trinidad Antifouling Bottom Paint:

    Great performance! Lasts for years on wet stored boats.

     
    1.0

    looks like seconds

    By pancho flynn

    from phoenix az

    About Me Avid Do-It-Yourselfer

    Pros

      Cons

        Best Uses

          Comments about Pettit Z-Spar Pettit Trinidad Antifouling Bottom Paint:

          both cans were beat up ,but the shipping box was not damaged so who ever filled the order shipped
          seconds. I hope the contents are ok we will see when we open them.

          (1 of 1 customers found this review helpful)

           
          5.0

          Trinidad a Great Bottom Paint

          By Editor

          from Charleston, SC

          About Me Avid Do-It-Yourselfer

          Verified Reviewer

          Pros

          • Even Paint Distribution

          Cons

            Best Uses

            • Large Areas

            Comments about Pettit Z-Spar Pettit Trinidad Antifouling Bottom Paint:

            Fouling protection on a 50ft trawler.

            Displaying reviews 1-3

            Back to top

            Related Items:
            JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog