Interlux Fiberglass Surface Prep YMA601 for removing wax and mold release agents from gelcoat before painting
Interlux Interlux
  • Interlux Fiberglass Surface Prep YMA601 for removing wax and mold release agents from gelcoat before painting

Interlux Fiberglass Surface Prep (YMA601)

Interlux Fiberglass Surface Prep is the first step in a 2 step system for removing mold release agents (wax) from gelcoat prior to application of antifouling boat bottom paint. It is also great at removing contamination, amine blush and cleaning previously painted surfaces before repainting. A pigmented formula acts as a guide during the cleaning process. The new low V.O.C. formula is safer and more environmentally friendly.
 
 
$27.45 / ea
qty.   
$27.45
$78.49
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Fiberglass Surface Prep is a mold release agent and wax remover, which precludes the need for sanding bare fiberglass when used with Fiberglass No Sand Primer.

The abrasive properties of the Fiberglass Surface Prep thoroughly cleans the gelcoat and provides key for Fiberglass No Sand Primer.

The use of Fiberglass Surface Prep to remove these contaminants is extremely important if the full adhesive qualities of Fiberglass No Sand Primer are to be realized.

Fiberglass Surface Prep can also be used to remove Amine Blush from clear epoxy and clean previously painted surfaces when prepping to repaint.

Fiberglass Surface Prep applies easily with a Scotch-Brite pad. Rinse with fresh water or wipe clean to remove.

BRAND: Interlux
Type: Wax and Grease Remover
4 1

REVIEW SNAPSHOT®

by PowerReviews
Interlux Fiberglass Surface Prep (YMA601)
 
4.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(1 of 1 customers found this review helpful)

 
4.0

Easy to remove wax and amine blush

By gizmo

from Florida

About Me Value Oriented

Staff Reviewer

Pros

  • Easy To Use
  • Works Effectively

Cons

  • none

Best Uses

  • Fiberglass hulls

Comments about Interlux Fiberglass Surface Prep (YMA601):

YMA601 is the best product I have found for removing mold wax from gelcoat before applying bottom paint. On a new boat the wax is there even if you can't see it. Fiberglass Surface Prep when scrubbed with a scotchbrite pad skuffs up the gelcoat a little helping the paint to stick better.

  • Primary use:
  • Personal

Displaying review 1

Back to top

Related Items:
JD on Facebook Live Tech Support JD Customer Photo Gallery Free Catalog