Bearing Buddy Trailer Wheel Hubs

Bearing Buddy trailer hubs seal out water and dirt, prevent corrosion and premature wear of boat trailer axle and wheel hub components. Sealing out dirt and water allows your trailer to be submerged past the hubs without fear of rust or corrosion, making launching and loading boats a more worry-free process.

These hubs work by filling the axle hub with grease until an internal piston is pressed outward 1/8". The piston is spring loaded and exerts 3psi on the grease, creating a slight pressure between the inside of the hub and the outside environment. Internal pressure prevents water from entering the bearings upon submersion.

Lubricant level can be checked by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled. Grease can be added to the accessible grease fitting located in the center of the piston.

1 pr and more

IN STOCK - Available for pickup

$18.14 / pr

qty.

The item was added to your wishlist.

The item was added to your shop cart.

Automatic pressure relief feature to prevent over-filling and over pressurization - prevents damage and possible rupture to the inner seals
Internal parts constructed from stainless steel
Outer barrel is triple chrome plated steel

Select the Bearing Buddy model that matches the bore of your particular hub.

To convert a model number to the hub bore in inches (or dust cap diameter), simply place a decimal point after the first digit in the model number.

Model #1980, for example, fits a 1.980 inch bore hole diameter.

Bearing Buddy part number	Outer Bearing Cone	Outer Bearing Cup(Race)	Hub Bore (mm)
	L44643, L44649, L44640	L44610	50.41
BEA-1781	LM11949	LM11910	45.33
BEA-2328	LM67048 Hub Not Counterbored	LM67010	59.25
BEA-1810	LM12749	LM12711	45.06
BEA-2441	LM-67048, hub counterbored, 15123 and others	LM-67010, 15245	62.08
BEA-2562	48548	48510	65.07