Power-Tech Marine AGM Batteries

Power-Tech Marine AGM Batteries use special absorbed electrolyte technologythat is superior to flooded lead-acid batteries. Fine, highly porous microfiber glass separators absorb the electrolyte, increasing efficiency by lowering internal resistance and boosting capacity.

Lower internal resistance also means that the batteries can be recharged faster than conventional batteries, allowing the user to put them back into operation sooner.

The completely sealed, valve-regulated AGM battery eliminates gas emissions and acid leakage for longer and safer battery operation. AGM batteries are completely maintenance-free.

1 ea and more

Additional shipping charges apply

$134.72 / ea

qty.

The item was added to your wishlist.

The item was added to your shop cart.

Power-Tech AGM batteries offer premium power, quality and performance.
Maintenance free
Long, deep discharges
Sealed/Submersible

Item Number	Volts	Group	Marine Cranking Amps	Reserve Capacity (minutes)	Amp Hours
BAT-8AU1	12v	U1	335	48	32
BAT-8A22NF	12v	22NF	390	90	55
BAT-8A24	12v	24	660	140	79
BAT-8A27	12v	27	810	176	92
BAT-8A31DT	12v	31	850	195	105
BAT-8A4D	12v	4D	1420	380	198
BAT-8A8D	12v	8D	1725	461	245
BAT-8AGC2	6v	GC2	865	380	187

Item Number	Dimensions (L" x W" x H")	Weight (Lbs)
BAT-8AU1	7.75 x 5.125 x 7.75	24
BAT-8A22NF	9.375 x 5.5 x 9.25	39
BAT-8A24	10.875 x 6.75 x 9.875	53
BAT-8A27	12.75 x 6.75 x 9.875	63
BAT-8A31DT	12.937 x 6.75 x 9.375	68
BAT-8A4D	20.75 x 8.2 x 10	124
BAT-8A8D	20.75 x 11 x 10	156
BAT-8AGC2	10.25 x 7.125 x 10.875	72

Charging:

Use a good, constant potential, voltage-regulated charger. For 12-volt AGM batteries, charge to at least 14.4 volts, but no more than 14.6 volts at 68F (20C). Do not charge in a sealed container.