Festool StickFix Rubin 2 Abrasives For RS 400 EQ Orbital and Duplex LS 130 EQ Linear Sanders
Festool Rubin 2 Abrasive sheets for use with Festool RS 400 EQ Orbital and Duplex LS 130 EQ Linear Sanders.
StickFix is the Festool brand name for hook and loop (H&L) sandpaper, 3-5/32" x 5-1/4".
Rubin 2 Abrasives are for use with bare wood.
Grits P50, P80, P100, P120 are available 10 sheets per pack
All Grits 50 sheets per pack
The item was added to your wishlist.
The item was added to your shop cart.
Rubin 2 Applications
P24 - P60
P80 - P120
P150 - P180
prep for finish
Rubin 2 abrasive was developed for natural wood, wood composites and veneers. Rubin has a special coating which sheds wood fibers. Use on hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, as well as on wood-based products.
Use grits P24 to P60 for rapid removal and rough surface quality. High material removal means low surface quality. This preps surfaces for higher grits.
Use grits P80 to P120 to accomplish intermediate sanding. You will still have a fast removal rate while achieving good surface quality.
Use grits P150 to P180 for finish sanding. Remember that soft wood does not require as fine a sanded finish as hardwood. If you want to sand wood higher than P180, use Brilliant 2 from P220 to P400. Sanding higher that P180 is not recommended for stains, as they will not penetrate as readily.
Use coarser grits for faster results; avoid skipping grits for best surface quality. The wood-specific coating for the Rubin abrasives means that they are long lasting.
Questions & Answers about Festool StickFix Rubin 2 Abrasives For RS 400 EQ Orbital and Duplex LS 130 EQ Linear Sanders: